Orange Art Glass Turtle Candle Holder Votive Tea Light Orange Art Glass Turtle Candle Holder Votive Tea Light.

This elegant glass Tortoise is a 2 piece candle holder.

The base holds a tea lite tight candle and the shell with opening, sets on top.

The base is textured clear glass. The upper shell is bright transparent orange with a touch of yellow on the hole and edge rims.

Maker and age unknown.

Measures 6 inches long, nose to tail X 4 inches wide X 2.5 inches high at top of shell lid.

No chips or cracks.

Cute gift for the turtle enthusiast. It should put off a beautiful glow when the candle is burning.
Condition: used
Manufacturer: unknown  

1 5/8 X 6.5 Hurricane Lamp Shade Clear Glass New. 1 5/8 X 6.5 Hurricane Lamp Shade Clear Glass New.

Dress up that old Light or Candelabra with a Brand New Replacement Shade.

It is thin, light weight glass completely plain and smooth.

Measures:

Height: 6.5 inches, includes fitter neck.
Top Flair rim: 3 5/8 inches diameter.
Fitter Neck: approx 7/8 inch.
Fitter: 1 5/8 inches diameter to outer edge.

Brand New.

Super nice for a Antique, Vintage or Contemporary Hurricane Lamp, Hanging Chandelier, Candle Lite Holder, or Candelabra.

Price is for one.
Condition: new
Manufacturer: unknown  

New Clear Glass Hurricane Candle Lamp Shade 1 5/8 X 7.5 New Clear Glass Hurricane Candle Lamp Shade 1 5/8 X 7.5.

Dress up that old Candle Holder or Light with a Brand New Replacement Hurricane Shade.

It is clear glass, completely plain and smooth.

Please Measure carefully to insure proper fit.

Your Shade Fitter must be just slightly smaller than the opening that it will fit into and wide enough to slip over a bulb socket if you are using it with electricity.

Measures:

Height: approx 7.5 inches.
Top Flair rim diameter: approx 4.75 inches.
Neck opening diameter: approx 1 3/8 inches.
Fitter Neck Height: approx .5 inch.
Fitter diameter to outer edge: approx 1 5/8 inches.

Brand New. Possible waves or bubbles in the glass.

Super nice for a Antique, Vintage or Contemporary Vanity Hanging Chandelier, Hanging Light Fixture, Candle Holder or Candelabra.

Price is for one.
Condition: new
Manufacturer: unknown  

1 5/8 X 6.5 Glass Hurricane Candle Light Lamp Shade 1 5/8 X 6.5 Glass Hurricane Candle Light Lamp Shade.

Dress up that old Light or Candelabra with a Brand New Replacement Shade.

It is thin clear glass, completely smooth with a gently scalloped upper rim and finished fitter.

Please Measure carefully to insure proper fit.

Your Shade Fitter must be just slightly smaller than the opening that it will fit into and wide enough to slip over a bulb socket if you are using it with electricity.

Measures:

Height: approx 6 3/8 inches.
Bulge Width diameter: approx 3 1/8 inches.
Top Flair rim diameter: approx 3 1/8 inches.
Neck opening diameter: approx 1 3/8 inches.
Fitter diameter to outer edge: approx 1 5/8 inches.

Brand New. No chips, cracks, scratches. Saw cut fitter does have the usual nicks along the edges.

Super nice for a Antique, Vintage or Contemporary Vanity Lamp, Hanging Chandelier or Light Fixture, Candle Holder, and Candelabras.

Price is for one.
Condition: new
Manufacturer: unknown  

Glass 1 5/8 X 7 Hurricane Candle Light Lamp Shade Glass 1 5/8 X 7 Hurricane Candle Light Lamp Shade.

Dress up that old Light or Candle Holder with a Brand New Replacement Hurricane Shade.

It is clear Optic glass with a crimped upper rim.

Please Measure carefully to insure proper fit.

Your Shade Fitter must be just slightly smaller than the opening that it will fit into and wide enough to slip over a bulb socket if you are using it with electricity.

Measures:

Height: approx 7 1/8 inches.
Top Flair rim diameter: approx 4 inches.
Neck opening diameter: approx 1 3/8 inches.
Fitter diameter to outer edge: approx 1 5/8 inches.

Brand New. Cut fitter has sharp edges and should be handled with caution.

Super nice for a Antique, Vintage or Contemporary Vanity Lamp, Hanging Chandelier Light Fixture, Candle Holders or Candelabras.

Price is for one.
Condition: new
Manufacturer: unknown  

Wide Bulge Hurricane Candle Light Lamp Shade Vintage Dress up that old Light or Candle Holder with a Gently Used Replacement Shade.

Clear glass completely plain with a big bulge.

Measures:

Height: approx 7 inches, includes fitter neck.
Top Flair rim: 3 7/8 inches diameter.
Fitter Neck Height: approx 1.25 inch.
Fitter: 2 15/16 inches diameter to outer edge.

Gently Used. No chips, cracks, stains. Scrathces, If any, are minuscule.

Super nice for a Antique, Vintage or Contemporary Hurricane Lamp, Candle Lite Holder, Chandelier or Wall Fixture.

Price is for one.
Condition: used
Manufacturer: unknown  

Cranberry Glass Floral Hurricane Lamp Shade 1 5/8 X 8 Cranberry Glass Floral Hurricane Lamp Shade 1 5/8 X 8.

ress up that old Lamp with a Brand New Elegant Cut and Etched Replacement Shade.

It is Cranberry stained clear glass with cut to clear etched flowers and stems with streamers with dots on ends.

Please Measure carefully to insure proper fit.

Your Shade Fitter must be just slightly smaller than the opening that it will fit into and wide enough to slip over a bulb socket if you are using it with electricity.

Measures:

* Height: approx 8 inches.
* Top Flair rim diameter: approx 4.5 inches.
* Neck opening diameter: approx 1 3/8 inches.
* Fitter diameter to outer edge: approx 1 5/8 inches.

Brand New.

Super nice for a Antique, Vintage or Contemporary Table Lamp, Hanging Chandelier, Candle Holder or Candelabra.

Price is for one.
Condition: new
Manufacturer: unknown  

Westmoreland Glass Daisy Fairy Lamp Candle Light Holder Westmoreland Glass Daisy Fairy Lamp Candle Light Holder.

This is a pretty Candle Holder made like a Miniature lamp.

The base is White milk glass. The shade is Satin Blue Mist Glass with hand painted white with Daisies with Gold Center, and White Leaves.

No Makers Mark. Made by the Westmoreland Glass Company in the 1970s.

No cracks. The Blue shade has a couple light rub scratches and a pin head sized chip approx 1 inch up from the bottom scallop. The base looks fine, with no damage.

A lovely Vintage Candle Votive Lite or addition to your Glassware Collection. Nice decorative, usable Candleholder.
Condition: used
Country of Origin: US
Manufacturer: Westmoreland  

Gold Lustre Hurricane Lamp Light 2 X 7.5 Shade Vintage Gold Lustre Hurricane Lamp Light 2 X 7.5 Shade Vintage.

Dress up that old Light or Candle Holder with a Gently Used Replacement Hurricane Shade.

Clear glass with a gold lustre iridescent coating, interior ribbed panel optics, and a crimped upper rim.

It is decorated with a white painted garland of leaves.

Please Measure carefully to insure proper fit.

Your Shade Fitter must be just slightly smaller than the opening that it will fit into and wide enough to slip over a bulb socket if you are using it with electricity.

Measures:

Height: approx 7.5 inches.
Top Flare rim: approx 4.75 inches diameter.
Fitter Neck Height: approx 3/8 inch, and part of total height above.
Neck opening: approx 1.75 inches diameter.
Fitter: approx 2 inches diameter to outer edges.

Gently Used. No chips, cracks. A few minor light scratches or signs of use. Saw cut fitter does have the usual nicks along the edges.

Super nice for a Antique, Vintage or Contemporary Hanging Chandelier, Hanging Light Fixture, Candle Holder, Candle Wall Scounce or Candelabra.

Price is for one.
Condition: used
Manufacturer: unknown  

Gold Lustre Hurricane Light Candle Lamp 1 7/8 X 7 Shade Gold Lustre Hurricane Light Candle Lamp 1 7/8 X 7 Shade.

Dress up that old Light or Candle Holder with a Gently Used Replacement Hurricane Shade.

Clear glass with a gold lustre iridescent coating on just the bulge, and a flared upper rim.

It is decorated with a white painted Floral Garland of Flowers and Leaves.

Please Measure carefully to insure proper fit.

Your Shade Fitter must be just slightly smaller than the opening that it will fit into and wide enough to slip over a bulb socket if you are using it with electricity.

Measures:

Height: approx 7 inches.
Top Flare rim: approx 3.5 inches diameter.
Bulge Width: approx 4 inches diameter.
Fitter Neck Height: approx .75 inch, and part of total height above.
Neck opening: approx 1.75 inches diameter.
Fitter: Just a bit under 2 inches diameter to outer edges.

Gently Used. No chips, cracks. A few minor light scratches or signs of use. Finished fitter.

Super nice for a Antique, Vintage or Contemporary Hanging Chandelier, Hanging Light Fixture, Candle Holder, Candle Wall Scounce or Candelabra.

Price is for one.
Condition: used
Manufacturer: unknown  

Hurricane Light Candle Holder Lamp Shade 3.5 X 8.5 Hurricane Light Candle Holder Lamp Shade 3.5 X 8.5.

Dress up that old Candle Holder with a Gently Used Replacement Shade.

It is clear glass with a slight blue tint, completely smooth with bulge in the middle and a flared upper and lower rim.

Please Measure carefully to insure proper fit.

Your Shade Fitter must be just slightly smaller than the opening that it will fit into and wide enough to slip over the Light or Candle you plan to use it with.

Measures:

Height: approx 8.5 inches.
Width diameter: approx 4.25 inches.
Top Flair rim diameter: approx 3.5 inches.
Neck opening diameter: approx 2.75 inches.
Fitter diameter to outer edge: approx 3.5 inches.

Gently Used. No chips, cracks, does have some scratches. See photos, the white spots are light glare, but the lines are scratches. They look really bad in photos, but there are only three, and they measure less than .5 inch each.

Super nice for a Antique, Vintage or Contemporary Hurricane Lamp.

Price is for one.
Manufacturer: used  

Etched Glass 1 5/8 X 5 in Hurricane Candle Lamp Shade Etched Glass 1 5/8 X 5 in Hurricane Candle Lamp Shade.

Clear Glass Etched with vines and what may be grapes, topped with a crimped rim.

Measures:

Height: 5.25 inches.
Crimped Rim Width: 4.75 inches diameter.
Fitter: 1 5/8 inch diameter to outer edges.

Gently used. Minor light scratches. Saw cut fitter edge has a few chips, which won't show inside holder.

Very pretty replacement for a Candle Wall Scounce, Chandelier Light Fixture, Candle Holder or Candelabra.
Condition: used
Manufacturer: unknown  

Vintage German Lustre Childs Toy Candle Holder Germany Vintage German Lustre Childs Toy Candle Holder Germany.

Vintage Porcelain China Set of Finger Hole Candle Holders. The lustreware paint is pale blue or lavender on one and the other is green.

Each is decorated with a raised open pink rose in full bloom and a rosebud.

These may be miniatures or part of a Children’s Set of Dishes or China.

Incised mark on bottom: 5096 Germany.

Measures approx. 3 inches diameter.

NO chips, cracks. There is considerable lustre wear to the Green on top of candle cup and handle all else is nice. The Lavender is a tiny bit of wear to the rose petals, all else is nice.

Cute addition to a Candle Holder Collection or Antique Child’s Set.
Condition: used
Country of Origin: DE
Manufacturer: unknown  

Chippewa Copper Candle Lamp Holder Light w/ Chimney Chippewa Copper Candle Lamp Holder Light w/ Chimney.

Made to look like a hurricane lamp. Copper curled tri corner candle holder holds a small candle 3/8 to 1/2 inch diameter.

Bottom is marked with an arrowhead with an Indian Head and Chippewa Copper - Burwood Products.

Small glass chimney sets over the candle cup, between the three curled points of holder. It is 5 inches tall and protects the flame from drafts.

Condition: Light minor corrosion to copper, no chips, cracks to chimney. It has some very tiny light usage scratches.

Condition: Used
Manufacturer: Chippewa Copper  

Clear Glass Hurricane Candle Lamp Shade 1 11/16 X 8 New Clear Glass Hurricane Candle Lamp Shade 1 11/16 X 8 New.

NOTE: Please check your sizing carefully.

Dress up that old Lamp or Candelabra with a Brand New Replacement Hurricane Shade.

It is clear blown glass completely plain or smooth with a flared upper rim.

Please Measure carefully to insure proper fit.

Your Shade Fitter must be just slightly smaller than the opening that it will fit into and wide enough to slip over a bulb socket if you are using it with electricity.

This Shade Measures:

Height: approx 8.25 inches.
Top Flare rim diameter: approx 5 inches.
Neck Height: approx 7/8 inches, and included in total height above.
Neck opening diameter: approx 1.5 inches.
Fitter diameter to outer edge: 11/16 inches, a tiny bit larger than the catalog advertised size of 1 5/8 inch.

Condition: Brand New. May have bubbles, waves, specks or straw marks in the glass, which is customary to blown glass.

Super nice for a Antique, Vintage or Contemporary Vanity or Table Lamp, Hanging Chandelier Light, Candle Holder or Candelabras.

Price is for one.
Condition: new
Manufacturer: unknown