AMX MX40 Carousel Slide Projector Wireless Remote If you show lots of 35mm slides on your Kodak Carousel slide projector, here is a wireless remote control that will plug into the remote control receptacle at the rear of your Kodak carousel projector.

This wireless remote control box is really a good invention for slide projectors and it will allow remote control from a significant distance.
Condition: Used & Operational
Size: Control box is 5 inches wide by 5 inches deep
Country of Origin: US
Manufacturer: AMX  

Large 35mm Slide Storage Box MADE IN THE USA: This is a handy box for storing all those old 35mm slides your Father took while your were growing up. It will hold 150 slides and keep them out of the dust and in order.

There are a few numbered stickers to guide you to make more of them if you care to. These will allow you to number each slot and assigned a title to each slide.

The box measures 2 inches tall by 14.5 inches wide and 7.5 inches deep. I have several of these and the color may vary but all are in great condition.
Circa: Unknown
Condition: Used
Country of Origin: US
Manufacturer: Logan DeLuxe  

New Plug-In Cord for Kodak Carousel Projectors Some of the older Kodak Carousel projectors came with a detachable cord that plugged onto a two-pin receptacle on the back of the projector. These cords often get lost, and it is difficult to find a replacement cord that fits.

I have made several cords of good quality that will fit the plug pins on the back of the Kodak projector (see photos). If your projector is like this and you have lost the cord, this is the replacement cord that will fit your machine.

This cord will also fit many other slide projectors including Sawyers, Sawyers 500, Crestline by Sawyers. It will fit any male twin-pin receptacle where the pins are approximately 3/8 inch apart from pin center to pin center as shown in the photo and the pins are the around the size of a #2 Pencil lead in diameter.
Condition: New
Manufacturer: Unknown  

Standard 8mm White Movie Leader Tape This film tape leader is for splicing in front of your Standard 8mm movie film so that is gives time for the film to thread through the projector before the action frames begin. This is why it is called LEADER film. It is white and will show nothing on the screen if the light is turned on. This is a new full roll of approximately 50 feet in length.
Condition: New
Size: See Description
Manufacturer: Unknown  

Kodak Super 8mm White Movie Leader Tape This film tape leader is for splicing in front of your Super 8mm movie film so that is gives time for the film to thread through the projector before the action frames begin. This is why it is called LEADER film. It is white and will show nothing on the screen if the light is turned on. This is a new full roll of approximately 50 feet in length.
Condition: New
Size: See Description
Manufacturer: Kodak  

Kodak Carousel Projector Remote Control Extension Cord Here is a special extension cord that plugs into the remote control socket on a Kodak Carousel slide projector while the other end is a receptacle for your remote control device. This is an inexpensive way to get to the front of the room so you can give presentations from your slide projector and keep full control of it yourself.
Circa: Unknown
Condition: Used and Operational
Size: 25 Feet Long
Color: Black
Country of Origin: US
Manufacturer: Kodak  

Kodak Carousel Projector Infrared Remote Control Here is a wonderful device that plugs into the remote receptacle of your Kodak carousel projector and allows you to extend the distance of your remove control using Infrared technology like the remote on your TV. The unit comes complete with its own remote control that includes Forward, Reverse and Focus buttons.

This unit works great and will free you of the old remote control cord and allows you to get to the front of the room for presentations, etc. It comes with its original packing, complete instructions and box.

Circa: Unknown
Condition: Used and Operational
Country of Origin: US
Manufacturer: Kodak  

Kodak Carousel Slide Projector Sound Synchronizer Mod 3 This is a Synchronizer unit that can be used to synchronize 35mm slide presentations to tape recorded/recorder narration. It permits the use of a stereo tape recorder with a Kodak Carousel projector by timing the slides to the recorded narration.

Complete instructions come with the unit. Hook up instructions come with it also as shown in the photos.
Condition: Used and Operational
Manufacturer: Kodak  

Vintage Movie Lamps & Light Bar Anyone growing up around a person taking home movies in the 1950's and 1960's will clearly remember these very bright camera lights. There were like carrying around your own planet of the sun. Each bulb is 375 watts of solid light reflection for good quality movie making without shadows.

The number on the bulbs is: PH 375 Watt Photo Medium Beam. The movie light bar comes with the bulbs and has its own on/off switch and long electrical cord.

If you do an indoor camera work (even with today's digital types) and you need some light on the subject, these lights will do the job with one bulb or two bulbs for sure.

The bulbs come in their own original package which is really cool.
Condition: New Old Stock
Size: 4.5 inches across the bulb
Manufacturer: Unknown  

Vintage Kodak Slide Carousel 35mm Stack Loader 7300 This is a stack loader for 35mm slides which attaches to a Kodak Carousel Slide projector. As shown in the photos, the round hub on the unit fits down over the center hub on a Kodak Carousel machine which quickly converts the machine into a direct view machine. This is a good method of editing/labeling slides and saves loading/unloading the carousel slide and fighting with the carousel position.

The slides just stack into this loader, and pressing the forward button on the projector advances the slide in the stack loader and already viewed slides eject to the other end of the stack loader. I have several of these units and they are all in good working condition.

It measures 6.5 inches long by 2 inches tall and about 7 inches deep including the hub.
Condition: Used and Operational
Size: See Description
Country of Origin: US
Manufacturer: Kodak  

Vintage Kodak EC Stack Loader 7301 This is a stack loader for 35mm slides which attaches to a Kodak Carousel Slide projector. As shown in the photos, the round hub on the unit fits down over the center hub on a Kodak Carousel machine which quickly converts the machine into a direct view machine. This is a good method of editing/labeling slides and saves loading/unloading the carousel slide and fighting with the carousel position.

The slides just stack into this loader, and pressing the forward button on the projector advances the slide in the stack loader.

It measures 6.5 inches long by 2 inches tall and about 7 inches deep including the hub.
Condition: Used & Operational
Manufacturer: Kodak  

New Tilton 1/4 x 7 3/4 S5A Projector Replacement Belt There are several home movies projectors from the 1060's through the 1980's that require a drive belt known as the TILTON 1/4 x 7-3/4 S5A. This new belt is the replacement belt that will fit machines that have this number stamped on the old broken belt. Or, if you have the old belt, you cam measure its length and width as the above number is in inches.
Condition: New
Size: 1/4 inch wide by 7 3/4 inches around
Country of Origin: US
Manufacturer: Unknown  

Miniature DA-LITE Handy Portable Movie Screen This movie screen was made by the famous DA-LITE movie screen people and it is the HANDY model. It is a portable unit that folds down into the small metal case and is perfect for carrying to off-site locations for presentations. The folding arms lock in place and the screen can be set on a table or desk top.

The screen is in excellent condition with no discoloration or tears in the cloth. The roll-up spring winds up the screen very well. If you are needing a portable screen, you will like this one.
Condition: Used & Operational
Size: 18 inches wide by 17 inches tall
Country of Origin: US
Manufacturer: Da-Lite  

Large 35mm Slide Storage Box This is a handy box for storing all those old 35mm slides your Father took while your were growing up. It will hold 150 slides and keep them out of the dust and in order.

The box closes nicely with a metal latch and it is in great condition.
Condition: Used & Operational
Size: 2 inches tall by 14.5 inches wide and 7.5 inches deep
Country of Origin: US
Manufacturer: Kenco  

Vintage 35mm Slide Trays in Storage Box MADE IN THE USA! Here are 6 slide trays with dust covers store in their own cardboard box with handle. These universal stack trays will fit Bell & Howell, Keystone, Viewlex, TDC, Ansco, Kodak slide tray projectors and many more as shown in the photos.

Each slide tray measures approximately 1-7/8 inches tall by 9.25 inches long and 2-3/16 inches deep. There is an index card stored under the trays that allows you to document each slide in each tray. Each tray holds 40 slides. The box full of 6 trays holds a total of 240 slides.

The storage box measures 2.5 inches tall by 15.5 inches wide and 9.5 inches deep.

Circa: Unknown
Condition: Used
Size: See Description
Country of Origin: US
Manufacturer: Yankee  

Vintage 35mm Slide Trays in Storage Box 7405 MADE IN THE USA! This durable latching storage box with handle is storing enough 35mm stack trays to hold 450 individual slides. These universal stack trays will fit Bell & Howell, Keystone, Viewlex, TDC, Ansco and Kodak slide tray projectors.

Each slide tray measures approximately 1-7/8 inches tall by 7 inches long and 2-3/16 inches deep. Each tray holds 30 slides and there are a total of 15 trays in the storage box.

The storage box measures 10 inches tall by 11 inches wide and 8.5 inches deep.

Circa: Unknown
Condition: Used & Operational
Size: See Description
Country of Origin: US
Manufacturer: Yankee  

Vintage 100 Capacity 35mm Slide Storage Box 7313 This slide storage box dates back a few decades. It is a wonderful item that is in pristine condition. It holds 100 35mm slides.

The box was made by Unifile. The box is a coated cloth material.
Circa: Unknown
Condition: Used & Operational
Size: 2.5 inches tall by 10 inches wide and 5.5 inches deep.
Country of Origin: US
Manufacturer: Unifile  

Kodak Black Leather Case for Slide Projector, etc This beautiful carrying case made by Kodak was originally for their 35mm slide projectors, but it can also be used for carrying almost anything. It is felt lined inside as shown in the photos.

The combination lock latches are like new and still have the original safety pins in place that sets the tumblers to zero, zero, zero. The complete instructions for setting the tumbler locks to your numbers are inside the case and come with the unit.

Help yourself to this wonderful item.
Circa: Unknown
Condition: Used & Operational
Size: 18 inches long by 13 inches tall and 8 inches wide
Color: Black
Manufacturer: Kodak  

Vintage Spring Drive Belt for 16mm Movie Projectors Here is a spare spring drive belt for most any old 16mm movie projector of the 1930's. Most projectors had these belts to drive the reel hub. The belts just slips on the reel hub pulleys.
Circa: 1930's
Condition: Used
Size: 1/8 inch thick and 20 inches long
Country of Origin: US
Manufacturer: Unknown  

Kodak Carousel Transvue 80 Circular Slide Tray This circular photo slide tray holds 80 slides and is used on the Kodak carousel slide projectors.

The tray measures approximately 9 inches across and 2.5 inches tall in the center of the tray.

The look of the boxes may vary from the photograph and the tray itself might be black or gray, but all will fit the Kodak Carousel slide projectors and be in working condition.
Condition: Used
Manufacturer: Kodak  

Kodak Carousel Transvue 140 Circular Slide Tray This circular photo slide tray holds 140 slides and is used on the Kodak carousel slide projectors.

The tray measures approximately 9 inches across and 2.5 inches tall in the center of the tray.

The look of the boxes may vary from the photograph and the tray itself might be black or gray and may be made by a different company than Kodak, but all will fit the Kodak Carousel slide projectors and be in working condition.
Condition: Used
Manufacturer: Kodak  

Vintage Sawyers Type Carousel 100 35mm Slide Tray These unique trays are hard to find but you can purchase them right here. Each tray holds 100 35mm slides. These trays are for the Sawyer's slide projectors with the carousel setup. They also will fit some other projectors such as Wards, GAF, Sears, Focal, Keystone and Minolta. If your projector uses the 100 slot carousel tray with teeth on the bottom edge, this will be the tray for you.

The tray box and tray color may vary from shipment to shipment, but all the trays will be of the above description and in good condition.
Condition: Used and Operational
Size: See Description
Country of Origin: US
Manufacturer: Sawyers  

Retro Ruby Red 35mm Carousel Slide Trays This is a rare specimen in the slide tray market. This Ruby Red tray is wonderful to say the least--and it is functional also. Each tray holds 80 2-inch slides and is designed to work with any Kodak Carousel slide projector.
Condition: Used
Manufacturer: Unknown  

Vintage Airequipt Circular Magazine 35mm Slide Tray These unique trays are hard to find but you can purchase them right here. Each tray holds 100 35mm slides. These trays are for the Airequipt slide projectors with the circular magazine setup.

The tray box and tray color may vary from shipment to shipment, but all the trays will be of the above description and in good condition.
Condition: Used and Operational
Size: See Description
Country of Origin: US
Manufacturer: Airequipt