Baia Standard 8mm Movie Film Editor with Splicer Here is a unique movie film editor that still is in good operating condition. It is a solid unit with metal arms made by a company famous for quality movie editing equipment. The light works well, and the unit is very compact and comes complete with its own film splicer and some 8mm splices. You can find more 8mm splices in my store by searching from any page. The winding arms fold in for storage.

This editor is for the Regular 8mm movie film only, not the Super 8 movie film which is wider with different hole spacing.

The original instruction sheet is with this machine.


Circa: Unknown
Condition: Used & Operational
Size: 8 inches tall by 14 inches wide and 6 inches deep.
Country of Origin: US
Manufacturer: BAIA  

Kodak Movie Film Splicer for 8mm/16mm Presstapes This is a good sized movie film splicer that could be mounted to a board to make it sturdy for cutting and splicing Regular 8mm or 16mm movie film. It is especially made to use with the modern Presstape splicing tapes. It has a long curved blade mounted in the lid and the jig pins of the splicer will fit both Standard 8mm and 16mm films. Included with this splicer are the original instructions.

Extra 8mm splice tapes are for sale in this store under FILM EDITOR, SPLICERS & SPLICES category.
Condition: Used & Operational
Size: Base plate is 5 inches deep by 4.5 inches wide
Country of Origin: US
Manufacturer: Eastman Kodak Company  

Vintage BAIA Dual 8mm Movie Film Splicer 7291 This is a nice heavy duty movie film splicer that could be mounted to a board to make it sturdy for cutting and splicing film. It has a curved blade mounted in the lid and the jig pins of the splicer will fit both Standard 8mm and Super 8 films.

More splicing tapes are for sale in my store on this web site under the Editors, Splicers & Splices Category.
Condition: Used and Operational
Size: 4 inches wide by 5.5 inches deep
Manufacturer: BAIA  

Vintage BAIA Dual 8mm Movie Film Splicer 7292 This is a nice heavy duty movie film splicer that could be mounted to a board to make it sturdy for cutting and splicing film. It has a curved blade mounted in the lid and the jig pins of the splicer will fit both Standard 8mm and Super 8 films.

More splicing tapes are for sale in my store on this web site under the Editors, Splicers & Splices Category.
Condition: Used and Operational
Size: 4 inches wide by 5.5 inches deep
Manufacturer: BAIA  

Argus Super 8 Movie Film Splicer 7294 This is a small heavy movie film splicer that could be mounted to a board (has two holes in the bottom allowing such) to make it sturdy for cutting and splicing film. It has a sharp edge on both lids to cut the film and then use Presstapes to repair the film by joining two ends together. The jig pins of the splicer on the both lids will only fit the Super 8 films. It does not for splicing Standard 8mm films.

Splicing tapes are for sale in my store on this web site under the Editors, Splicers & Splices Category.
Condition: Used and Operational
Size: 2.5 inches wide by 3 inches deep
Manufacturer: Argus  

Baia Standard 8mm Movie Film Editor 7339 Here is a unique movie film editor that still is in good operating condition. It is a solid unit with metal arms made by a company famous for quality movie editing equipment. The light works well, and the unit is very compact. The winding arms fold in for storage. The screen has a shadow spot where someone may have stuck a price tag at one time but once the light is on and movie loaded, it disappears and is not a problem.

This editor is for the Regular 8mm movie film only, not the Super 8 movie film which is different hole spacing.



Condition: Used & Operational
Size: 8 inches tall by 14 inches wide and 6 inches deep.
Manufacturer: BAIA  

1950's Kalart Bakelite Mod EV-8 8mm Movie Film Editor This wonderful old movie film editor is in good working condition and complete with its own splicer machine for Standard 8mm movie film.

This unit comes with an empty 3 inch take-up reel. I do sell Standard 8mm splices in this store under this same category. The photo shows an empty glue bottle which may or may not come with this machine as I have several of these and some do not have the empty bottle which serves no purpose other than nostalgia.

Help yourself to this fine unit that was made to last. Instructions for operating on on the box.
Condition: Used & Operational
Size: 12 inches wide by 11 inches deep by 8 inches tall
Country of Origin: US
Manufacturer: Kalart  

Baia Standard 8mm Movie Film Editor 7382 Here is a unique movie film editor that still is in good operating condition. It is a solid unit with metal arms made by a company famous for quality movie editing equipment. The light works well, and the unit is very compact. The winding arms fold in for storage.

This editor is for the Regular 8mm movie film only, not the Super 8 movie film which is different hole spacing.



Condition: Used & Operational
Size: 8 inches tall by 14 inches wide and 6 inches deep.
Manufacturer: BAIA  

Vintage Argus 8mm Movie Viewer/Editor 7414 Here is a unique movie film editor that still is in good operating condition. It is a solid unit made by a company famous for quality movie editing equipment. The light works well, and the unit is very compact. The winding arms fold in and the cranks fold down for storage. The cord is stored in a compartment in the rear of the machine.

This viewer/editor is for the Regular 8mm movie film only, not the Super 8 movie film which is a different hole spacing.

The unit measures 8 inches tall by 8 inches wide and 5 inches deep when in the storage position.
Circa: Unknown
Condition: Used & Operational
Color: Black
Manufacturer: Argus  

HP Standard 8mm Steel Movie Film Splicer 7316 MADE IN THE USA! This is a small movie film splicer that could be mounted to a board (has two holes in the bottom allowing such) to make it sturdy for cutting and splicing film. It has a sharp edge on both lids to cut the film and then use Presstapes to repair the film by joining two ends together. The jig pins of the splicer on the both lids will fit the Standard 8mm films. It is NOT for splicer SUPER 8 films.

Splicing tapes are for sale in my store on this web site under the Projector Parts & Accessories Category.
Circa: Unknown
Condition: Used and Operational
Size: 3.5 inches wide by 4 inches deep
Country of Origin: US
Manufacturer: Hudson Photographic  

Mansfield Standard 8mm Movie Film Splicer Unit 7315 This is a small movie film splicer named Holiday EZ Splicer that is for cutting and splicing film. It has a curved stainless steel cutting blade mounted in the lid and the jig pins of the splicer will fit both Standard 8mm and 16mm films. I have press tape splices for Regular 8mm splices available in my store.
Circa: Unknown
Condition: Used & Operational
Size: 2 inches wide by 3 inches deep
Country of Origin: US
Manufacturer: Mansfield Industries  

HP Standard 8mm Steel Movie Film Splicer 7407 MADE IN THE USA! This is a small movie film splicer that could be mounted to a board (has two holes in the bottom allowing such) to make it sturdy for cutting and splicing film. It has a sharp edge on both lids to cut the film and then use Presstapes to repair the film by joining two ends together. The jig pins of the splicer on the both lids will fit the Standard 8mm films. It is NOT for splicer SUPER 8 films.

Splicing tapes are for sale in my store on this web site under the Projector Parts & Accessories Category.

This item comes complete with its original box and instructions for use.
Circa: Unknown
Condition: Used and Operational
Size: 3.5 inches wide by 4 inches deep
Country of Origin: US
Manufacturer: Hudson Photographic  

Kodak Super 8, Standard 8mm and 16mm Movie Splicer This is a quality movie film splicer that could be mounted to a board (has two holes in the bottom allowing such) to make it sturdy for cutting and splicing film. It has a sharp straight blade mounted in the lid and the jig pins of the splicer on the middle lid will fit the Super 8, Standard 8mm and 16mm films.

Splicing tapes are for sale in my store on this web site under the Projector Parts & Accessories Category.
Circa: 1970's
Condition: Used and Operational
Size: 4.5 inches wide by 5 inches deep
Color: Gray
Country of Origin: US
Manufacturer: Kodak  

Standard 8mm and Super 8mm (Dual 8) Movie Film Splicer This is a small movie film splicer that could be mounted to a board to make it sturdy for cutting and splicing film. It has a curved blade mounted in the lid and the jig pins of the splicer will fit both Standard 8mm and Super 8 films which most folks call a Dual 8 splicer.
Circa: Unknown
Condition: Used & Operational
Size: 2 inches wide by 2.5 inches deep
Country of Origin: US
Manufacturer: BAIA  

HP Standard 8mm Steel Movie Film Splicer 7445 MADE IN THE USA! This is a small movie film splicer that could be mounted to a board (has two holes in the bottom allowing such) to make it sturdy for cutting and splicing film. It has a sharp edge on both lids to cut the film and then use Presstapes to repair the film by joining two ends together. The jig pins of the splicer on the both lids will fit the Standard 8mm films. It is NOT for splicer SUPER 8 films.

Splicing tapes are for sale in my store on this web site under the Projector Parts & Accessories Category.

This item comes complete with its original box and instructions for use.
Circa: Unknown
Condition: Used and Operational
Size: 3.5 inches wide by 4 inches deep
Country of Origin: US
Manufacturer: Hudson Photographic  

Kalart Regular 8mm Movie Film Splicer This unit appears to have never been used or used very little. This is a splicing guide for repairing broken Regular 8mm movie film. The instructions read from an older day when cement was used to bind two film strips together (called wet splicing). With today's technology, it looks like this unit can be used for a square cut and then use this jig as a guide to hold the film in place while using press-tape splices. I have the Standard 8mm press-tape splices available in my store under the Editors, Splicers & Splices category.
Circa: Unknown
Condition: Used & Operational
Size: Approximately 4 inches square
Country of Origin: US
Manufacturer: Kalart  

HP Regular 8mm Movie Film Splicer Unit 7444 This is a small movie film splicer that could be mounted to a board to make it sturdy for cutting and splicing film. It has a curved stainless steel cutting blade mounted in the lid and the jig pins of the splicer will fit both Regular 8mm films. This splicer is not for Super 8 film. I have press tape splices available in my store under the Editors, Splicers and Splices category.+

You can turn the dial on the front of the unit to select a vertical cut or diagonal cut of the film.
Condition: Used & Operational
Size: 3 inches wide by 3.5 inches deep
Country of Origin: US
Manufacturer: Hudson Photographic  

Baia Super 8 Movie Film Reviewer/Editor Here is a handy Super 8 movie film editor and viewer by the famous BAIA company. It is in working order and the light is working properly. This machine is only for the Super 8 size of movie film of the 1960's & 1970's.

The screen measures 3.25 inches by 2.5 inches. I have several of these machines and the color accents may vary from machine to machine but all of this same model.

Circa: Unknown
Condition: Used & Operational
Size: 8.5 inches tall by 6 inches wide and 8.5 inches deep.
Country of Origin: US
Manufacturer: Baia  

Baia Standard 8mm Movie Film Splicer This is a small movie film splicer that has a sharp blade mounted in the lid. The center partition is removable and the Standard 8mm film jig pins for splicing two ends of film together.

Press Tape Splicers are for sale in my store on this web site under the Movie Splices and Splicers Category.
Condition: Used and Operational
Size: 2.5 inches wide by 3.5 inches deep
Country of Origin: US
Manufacturer: BAIA  

BAIA Dual 8mm Movie Film Editor 7454 MADE IN THE USA: Here is a unique movie film editor that still is in good operating condition. It is a solid unit made by a company famous for quality movie editing equipment. The light works well, and the unit is very compact and comes complete with its own film splicer (no splices, just the device for cutting and splicing - you can find Standard 8mm and Super 8mm Presstape splices in my store). The winding arms fold in and the cranks fold down. This editor is for the Standard 8mm and the Super 8 movie films.


Circa: Unknown
Condition: Used & Operational
Size: 6.5 inches tall by 19 inches wide and 7 inches deep.
Country of Origin: US
Manufacturer: BAIA  

Vintage Dual 8 Movie Film Splicer 7457 This is a small movie film splicer that could be mounted to a board to make it sturdy for cutting and splicing film. It has a curved blade mounted in the lid and the jig pins of the splicer will fit both Standard 8mm and Super 8 films.
Circa: Unknown
Condition: Used & Operational
Size: 2 inches wide by 2.5 inches deep
Color: Black
Country of Origin: US
Manufacturer: Unknown  

Vintage Walz 8mm Movie Editor Model II Here is a unique movie film editor that still is in good operating condition. It is a solid unit made by a company famous for quality movie editing equipment. The light works well, and the unit is very compact and comes complete with its own self storing cover. The winding arms fold in and the cranks fold down. The cord also has an on/off switch for convenience.

This editor is for the Regular 8mm movie film only, not the Super 8 movie film which is wider with different hole spacing.


Circa: Unknown
Condition: Used & Operational
Size: 13 inches wide (unfolded) by 6 inches tall and 7 inches deep
Color: Wrinkle Finish Gray
Country of Origin: US
Manufacturer: Walz  

Baia Standard 8mm Movie Film Editor with Splicer 7460 Here is a unique movie film editor that still is in good operating condition. It is a solid unit made by a company famous for quality movie editing equipment. The light works well, and the unit is very compact and comes complete with its own film splicer (no splices, just the device for cutting and splicing - you can find 8mm splices in my store under the Film Editors, Splicers & Splices category). The winding arms fold in and the cranks fold down.

This editor is for the Regular 8mm movie film only, not the Super 8 movie film which is wider with different hole spacing. This model has the larger screen for easier viewing.



Circa: Unknown
Condition: Used & Operational
Size: 6.5 inches tall by 19 inches wide and 7 inches deep.
Country of Origin: US
Manufacturer: BAIA  

Standard 8mm White Movie Leader Tape This film tape leader is for splicing in front of your Standard 8mm movie film so that is gives time for the film to thread through the projector before the action frames begin. This is why it is called LEADER film. It is white and will show nothing on the screen if the light is turned on. This is a new full roll of approximately 50 feet in length.
Condition: New
Size: See Description
Manufacturer: Unknown  

Kodak Super 8mm White Movie Leader Tape This film tape leader is for splicing in front of your Super 8mm movie film so that is gives time for the film to thread through the projector before the action frames begin. This is why it is called LEADER film. It is white and will show nothing on the screen if the light is turned on. This is a new full roll of approximately 50 feet in length.
Condition: New
Size: See Description
Manufacturer: Kodak  

New Film Splices For Regular 8mm Movie Film These new film splices are for repairing Regular 8mm movie film when you have a break in the film or want to splice two or more films together. There are 10 envelopes per package and each envelope contains two clear plastic pre-glued and slotted splices--one for each side of the film. Splicing film works better and easier with a film splicing machine or jig, but it can be done by hand if you take your time and be careful lining up the holes in the splices and film.
Condition: New
Manufacturer: Unknown  

New Film Splices For Super 8 Movie Film These new film splices are for repairing Super 8 movie film when you have a break in the film or want to splice two or more films together. There are 10 envelopes per package and each envelope contains two clear plastic pre-glued and slotted splices--one for each side of the film. Splicing film works better and easier with a film splicing machine or jig, but it can be done by hand if you take your time and be careful lining up the holes in the splices and film.
Condition: New
Manufacturer: Unknown  

HP Standard 8mm Movie Film Splicer 7342 This is a small movie film splicer that could be mounted to a board to make it sturdy for cutting and splicing film. It has a curved stainless steel cutting blade mounted in the lid and the jig pins of the splicer will fit the Standard 8mm movie films. I have press tape splices 8mm film in this store under the FILM EDITOR, SPICERS & SPLICES category.
Condition: Used
Size: 3 inches wide by 3.5 inches deep
Manufacturer: Hudson Photographic