Corvette 1960's Trophy Ornament Paperweight Cast Metal This is a nice vintage Corvette, or Stingray, style sports car trophy or paperweight ornament. It is shaped much like a Corvette, but with a longer hood and grill area. It was part of a collection of cast hood and trophy ornaments we are presently listing for sale, most from the mid-1900's to 1980's era. This one is not marked by the maker. This one is die cast metal, and the metal seems to have plenty of nickel or pewter in the alloy as there is no rust present even though is the not chrome plated. It weighs about 1.0 pounds and has two port holes on the bottom, and you can see the wall stock of the exterior is about 1/8" thick, basically hollow in the inside, not solid. The casting is 6" long overall, and about 3.5" tall (not including the threaded stud. The casting nicely cast, no pits, or voids, smooth surfaces, a few tiny imperfections, that could be polished out. The threaded stud is well attached. Would make a nice vintage trophy, or desk paper weight!

Circa: 1960's
Manufacturer: unknown  

Trophy Ornament 1958 Pontiac Paperweight This is a nice vintage 1958 Pontiac (customized) style sports car trophy or paperweight ornament. It is detailed much like a "58 Catalina, but with a shorter wheel base, and a more rounded roof. It was part of a collection of cast hood and trophy ornaments we are presently listing for sale, most from the mid-1900's to 1980's era. This one is not marked by the maker. This one is die cast metal, and the metal seems to have plenty of nickel or pewter in the alloy as there is no rust present even though is the not chrome plated. It weighs about .7 pounds and has a port hole on the bottom, and you can see it is basically hollow inside, not solid metal. The casting is 4.6" long overall, and about 2.7" tall (not including the threaded stud. The casting nicely cast, no pits, or voids, smooth surfaces, a few tiny imperfections, that could be polished out. The threaded stud is well attached. Would make a nice vintage trophy, or desk paper weight!


Condition: Good++
Manufacturer: unknown  

Trophy Ornament 1961 Ford Galaxy Paperweight This is a nice vintage 1961 Ford Galaxy car trophy or paperweight ornament. It is detailed much like a "61 Galaxy with some differences. It was part of a collection of cast hood and trophy ornaments we are presently listing for sale, most from the mid-1900's to 1980's era. This one is not marked by the maker. This one is die cast metal, and the metal seems to have plenty of nickel or pewter in the alloy as there is no rust present even though is the not chrome plated. It weighs about .5 pounds and has two port holes on the bottom, and you can see inside the interior, it is basically hollow, not solid. The casting is 4.3" long overall, and about 2.7" tall (not including the threaded stud. The casting nicely cast, no pits, or voids, smooth surfaces, a few tiny imperfections, that could be polished out. The threaded stud is well attached. Would make a nice vintage trophy, or desk paper weight! Unique!


Condition: Used
Manufacturer: Unknown  

Trophy Ornament 1965 Dodge Coronet Paperweight This is a nice vintage 1965 Dodge Coronet car trophy or paperweight ornament. It is detailed much like a "65 Coronet with some differences. It was part of a collection of cast hood and trophy ornaments we are presently listing for sale, most from the mid-1900's to 1980's era. This one is not marked by the maker. This one is die cast metal, and the metal seems to have plenty of nickel or pewter in the alloy as there is no rust present even though is the not chrome plated. It weighs about 1 pounds and has a port hole on the bottom, and you can see the from the exterior that the inside is basically hollow, not solid. The casting is 5.25" long overall, and about 3.2" tall (not including the threaded stud. Note the piston design of the base! The casting nicely cast, no pits, or voids, smooth surfaces, a few tiny imperfections, that could be polished out. The threaded stud is well attached. Would make a nice vintage trophy, or desk paper weight! Unique!


Circa: mid-1900's
Condition: Used
Manufacturer: Unknown  

Pewter Creamer & Sugar Set w/Tray Offering this nice, clean, creamer and sugar set with a fitted tray, all pieces are made of pewter and each piece is marked "OLD ENGLISH GENUINE PEWTER" with the windmill shaped logo on each. The tray is 4.75 x 8.25", and the creamer and sugar is 2.75" diameter x 2.5" high. All three pieces are in good+ condition, some minor wear and scratches, mostly on the bottoms of the pieces, the tray is very slightly bent on the edges in a few places. Less than normal wear since antique pewter is often dented or bent due to the fact that it is a soft and pliable metal. This set looks very nice overall!
Circa: early 1900's-Mid 1900's
Condition: Good+
Manufacturer: OLD ENGLISH  

Hydroplane Boat Racing Trophy Ornament Paperweight Cast This is a nice vintage 1960's era racing boat trophy or paperweight ornament. It is nicely detailed, much like the small hydo-plane racing boats of the era, with an outboard motor. It was part of a collection of cast hood and trophy ornaments we are presently listing for sale, most from the mid-1900's to 1980's era. This one is not marked by the maker. This one is die cast metal, and the metal seems to have plenty of nickel or pewter in the alloy as there is no rust present even though is the not chrome plated. It weighs about 1 pounds and has a port hole on the bottom, one behind the driver on top, from the cast coring process. This coring process was used to maintain a better wall thickness, and details on each casting, the inside is basically hollow, not solid. The casting is 6" long overall, and about 3.7" tall (not including the threaded stud). Note the design of the base, can be attached to most any type of material as long as a counter bore hole is suppied for a 1/4-20 nut to hold it in place. The casting nicely detailed, no pits, smooth surfaces, a few tiny imperfections, that could be polished out. The threaded stud is well attached. Would make a nice vintage trophy, or desk paper weight! Unique!

Circa: mid-1900's
Condition: Good++
 

Cafe Racing Trophy Ornament Paperweight Cast Metal This is a nice vintage 1960's era cafe racing motorcycle trophy or paperweight ornament. It is nicely detailed, much like the racers of the era, with larger faring on the front of the bike. It is part of a collection of cast hood and trophy ornaments we are presently listing for sale, most from the mid-1900's to 1980's era. This one is marked by the maker, reads "SCOTT PRODS" on the bottom ring around the threaded screw. This one is die cast metal, and the metal seems to have plenty of nickel or pewter in the alloy as there is no rust present even though is the not chrome plated. It weighs about 1 pounds and has port holes on the bottom from the cast coring process. This coring process was used to maintain a better wall thickness, and details on each casting, the inside is basically hollow, not solid. The casting is 5" long overall, and about 3.7" tall (not including the threaded stud). Note the design of the base, can be attached to most any type of material as long as a counter bore hole is suppied for a 1/4-20 nut to hold it in place. The casting is nicely detailed, no pits, smooth surfaces, a few tiny imperfections, that could be polished out. The threaded stud is well attached. Would make a nice vintage trophy, or desk paper weight! Unique!
Circa: mid-1900's
Condition: Good++
Manufacturer: Scott Products  

Trophy Ornament Paperweight Vintage Motorcycle Pewter This is a nice vintage 1950's era motorcycle with rider trophy or paperweight ornament. It is nicely detailed, much like the street bikes of the era, with the old style handlebars and helmet. It is part of a collection of cast hood and trophy ornaments we are presently listing for sale, most from the mid-1900's to 1980's era. This one is not marked by the maker. This one is die cast metal, and the metal seems to have plenty of nickel or pewter in the alloy as there is no rust present even though is the not chrome plated. It weighs about 1/2 pounds and is solid, not hollowed out like most others from the collection. It is also smaller. The casting is 3.2" long overall, and about 3.7" tall (not including the threaded stud). Note the design of the base, can be attached to most any type of material as long as a counter bore hole is suppied for a 1/4-20 nut to hold it in place. The casting is nicely detailed, no pits, smooth surfaces, a few tiny imperfections, that could be polished out, one larger area on the rider's back needs finishing. The threaded stud is well attached. Would make a nice vintage trophy, or desk paper weight! Unique!
Circa: mid-1900's
Condition: Good++