Shades

Lighting Replacement Chimney Lampshade for Antique, Vintage or Contemporary Kerosene Oil Burner or Electric Lamp. Great Light Cover for Desk, Vanity, Table, Tension Pole or Floor Lamp, Hanging Chandelier, Wall Sconce or Kitchen Light Fixture. This lightshade must set upright in your lamp burner or gallery. Measures: Height: approx 11 1/2 inches. Top rim: approx 3 1/4 inches diameter. Bulge: approx 6 1/2 inches diameter. Fitter Neck Height Below Bulge: approx 1 inch. Fitter: approx 3 1/2 inches diameter to outside edges. Gently Used. No chips, cracks. A few minuscule light usage scratches. Saw cut fitter bottom has the usual tiny cutting nicks. Price is for one.

Lighting Replacement LampShade for use in Antique, Vintage or Contemporary Kerosene, Oil or Electric Light Fixtures. Light Cover For use with Flush Mount or Ceiling Fan Light Fixture. Great for Kitchen, Living Room, Dining Room, Bedroom, Office, Bathroom, Laundry, Hallway or Porch. Hand Blown Clear glass lightshade, Painted white interior, plain round squashed pillow shape, flame polished rim. This Shade is held in place by 3 set screws (not included). Measures: Height: approximately 4 inches. Bulge Width: approximately 9 1/4 inches diameter. Fitter Width: approximately 7 5/8 inches diameter to outer edges, made for a 8 inch holder. Gently Used. No chips or cracks. Has some rub scratches and possible minor small metal marks which I don't think will show when in use. Interior paint is nice. Price is for one Shade only.

Lighting Replacement LampShade for use in Antique, Vintage or Contemporary Kerosene, Oil or Electric Light Fixtures. Light Cover For use with Chandelier, Wall Sconce Bracket, Pendant or Ceiling Fan Light Fixture. Great for Kitchen, Living Room, Dining Room, Bedroom, Office, Bathroom, or Hallway. Marked Murray Feiss. Blown Pressed Clear glass lightshade, frosted raised ribs, clear raised drapes, gracefully scalloped, squared shape, finished rim, with saw cut neckless center hole rim. This Neckless shade attaches with a Shade ring (Not Included) which screws onto the threaded light socket, inside the shade. Measures: Height: approximately 4 1/2 inches. Flare Rim Width: approximately 10 1/4 inches diameter. Fitter Opening: approximately 1 5/8 inches diameter. Gently Used. No cracks or scratches. Thick, heavy glass with very minor chips along the inside center hole, which will be totally covered by the light fixture and screw on ring. Very minor light signs of use. Real nice shade. Price is for one Shade only.

Lighting Replacement Lampshade for Antique, Vintage or Contemporary Bathroom Slip, Desk, or Wall Sconce Light Fixture. Made in Japan. Heavy Porcelain, Green Gloss Glazed lightshade, raised ribbed column pattern trimmed with Gold Gilt band along scalloped rim. This shade is held in place by 3 screws (not included). Measures: Height: approx 8 inches. Depth: approx 3 1/4 inches diameter. Width: approx 5 inches diameter. Fitter Neck Opening: approx 1 3/8 inches diameter. Fitter Width: approx 2 1/4 inches diameter to outer edges. Brand New old stock. Note: Trim looks silver in photo, it is gold. Teenie bit of gold trim is missing. White spots are mostly light reflections. There are 3 white glaze misses on fitter at screw indents, which will be inside the light fixture. Price is for one.

Lighting Replacement Lampshade for Kitchen, Bedroom Flush Mount Ceiling Light Fixture. Blown Opal Milk Glass lightshade, decorated with 6 Decals of gold, orange, white and brown flowers, Avocado bands, flame polished fitter rim. I think this shade is held in place by a spring bar which inserts into the opening or a mechanism which moves into place against the very tiny lip along the fitter. Measures: Depth: approx 5 inches. Bulge Width: approx 14 1/4 inches diameter. Fitter: approx 12 7/8 inches diameter to outside edges Gently Used. No chips or cracks. Has some light surface usage scratches, which don't appear to show much. Price is for one.

Lighting Replacement LampShade for use in Antique, Vintage or Contemporary Kerosene, Oil or Electric Light Fixtures. Light Cover For use with Student Desk or Table, Hanging Kitchen or Library Style Lamp, Wall Bracket or Sconce, Chandelier Light Fixture. Great for Kitchen, Living Room, Dining Room, Bedroom, or Office. Fits Aladdin Lamps. Hand Blown Pressed Transparent Pastel Pink glass lightshade, Diamond Quitlted Pattern, Beaded Neck and Fitter Base, Crimped Top Rim, saw cut fitter rim. This shade sets on a tripod or ring shade holder. Measures: Height: approximately 6 3/4 inches. Top Flare Rim Width: approximately 4 3/4 inches diameter. Bulge Width: approximately 11 inches diameter. Fitter Width: approximately 9 7/8 inches diameter to outer edges, made for a 10 inch holder. Brand New. Price is for one Shade only.

Lighting Replacement Lampshade for Antique, Vintage or Contemporary Wall Sconce, Student Desk, Table, Vanity, Floor Tension or Pole Lamp, or Hanging Chandelier Light Fixture. Transparent Blue glass lightshade, Diamond Bead Quilted pattern, Crimped rim. This shade sets on a tripod or ring holder. Measures: Height: approx 5 1/2 inches. Top Flare Rim Width: approx 4 3/8 inches diameter. Bulge Width: approx 8 inches diameter. Neck Opening: approx 3 inches diameter. Fitter Width: approx 7 inches diameter to outer edges. Brand New. Saw cut fitter does have the usual flea nicks along the edges. Price is for one.

Lighting Replacement for Antique, Vintage or Contemporary Student Desk or Table Lamp, or Hanging Chandelier. Opal white milk glass lightshade, partially sprayed light tan, trimmed with Brown Rings, Band of Circled Bouquets of Roses and Blue Flowers. Ornate trim around neck, Crimped upper rim. Originally made for Quoizel lamps and lighting. Measures: Height: approx 5 3/4 inches. Top Flare Rim: approx 5 3/8 inches diameter. Bulge Width: approx 8 1/4inches diameter. Fitter Width: approx 6 3/4 inches diameter to outer edges, made for a 7 inch holder. Gently Used. No cracks. Scratches, if any, are minuscule. There are a few water shadow marks showing slighty on the dark brown bands. Saw cut fitter does have the usual nicks and shallow chips along the edges. Price is for one.

Flawed lighting replacement lampshade for Art Deco Style 1930s 1940s Antique, Vintage,or Contemporary Table and Floor Reflector Lamp or hanging Pendant. Milkglass lightshade, 5/8 inch smooth flare rim, Waffle design. This shade is held in place by 3 screws (not included). Measures: Height: 5 3/4 inches. Top Flare: 8 inch diameter. Fitter inside width: approx 1 5/8 to 1 11/16 inches diameter. Fitter Width: approx 2 3/16 inches diameter to outer edges. Brand New. It has a 3 inch long white streak which shows on both the inside and outside. It is in the glass. (See Photos). Price is for one, reduced due to flaw.

Lighting Replacement LampShade or cover for use in Antique, Vintage or Contemporary Chandelier, Wall Sconce, Hanging Pendant Light Fixure or Candle Holders. Great for Kitchen, Living Room, Dining Room, Bedroom, Bathroom and Hallways. Blown Opal White Milk glass lightshade, plain double open ended Cylinder Tube, with saw cut and ground rims. This shade has no flange or side holes, it must set upright in the holder. . Measures: Height: approx 8 inches. Glass Thickness: varies, approx 1/8 to 1/4 inches. Opening: approx 2 5/8 inches diameter. Fitter width: 2 15/16 inches diameter, made for a 3 inch holder. Brand New. No chips, cracks, scratches. Saw cut fitter does have the usual flea nicks along the edges. Price is for one Shade only.

Flawed Lighting Replacement Lampshade for Antique, Vintage or Contemporary Hanging Chandelier Light Fixture, Student Desk, Table, Floor Tension or Pole Lamp, Wall Sconce. Thin layer of Blown Cherry Red or Ruby Cased over Opal White Milk glass lightshade, straight upper ground rim. Color varies depending on type of lighting, but it is cherry red, leaning towards maroon in a different light, but bright red when lighted. This shade sets on a tripod or ring holder. Measures: Height: approx 5 5/8 inches. Top Flare Rim Width: approx 4 1/2 inches diameter. Bulge Width: approx 8 inches diameter. Fitter Neck Opening: approx 3 inches diameter. Fitter Width: approx 6 3/4 inches diameter to outer edges. Brand New but had minor Flaws as listed below. Ground Rims. 1. Tiny minor flea nicks on top rim. 2. Tiny pin head sized chip on top rim. 3. Very light 1/4 inch scratch on bulge area. 4. Light minor 1/8 inch rub scratch on lower area. If you have a preference mention it in the comments section of the order form. Price is for one, reduced due to flaw.

Flawed Lighting Replacement for Antique, Vintage or Contemporary Burners or Electric Hanging Light Fixture, Student Desk or Table Lamp. Will fit Aladdin. American made in U.S.A, Hand Blown Opal glass, Melon Shape, straight upper rim. This shade sets on a tripod or ring holder. Measures: Height: approx 6 1/4 inches. Bulge Width: approx 10 1/4 inches diameter. Top Flare Rim: approx 5 inches diameter. Neck Opening: approx 3 1/4 inches diameter. Fitter Width: approx 9 7/8 inches diameter to outer edges. Brand New. No cracks, scratches. Small, less than 1/8 inch chip on ground top rim. Possible bubbles in the glass. Saw cut fitter does have the usual flea nicks along the edges. Minor variances and seam lines inherent to hand made glass. Price is for one, reduced due to tiny chip.

Lighting Replacement LampShade for use in Antique, Vintage or Contemporary Electric Light Fixtures. Light Cover For use with Chandelier, Ceiling 3 Bead Chain or Pendant Light Fixture. Great for Living Room, Dining Room, Bedroom or Office. Pressed Clear glass lightshade, raised exterior center flowers, interior incised floral design, brown and tan painted interior, Scalloped rim. Three holes for bead chains. This shade is held by three chains which go through the holes, then attach to a one bulb bead chain ceiling light fixture. Measures: Height/Depth: approximately 4 inches. Width: approximately 10 inches diameter. Bead Chain Hole Opening: approximately 3/16 inch diameter. Gently Used. Paint is nice. No cracks. Possible very small nicks or chips (no more than 1/8 inch) on inside scalloped rim where they will not show when in use. May be very minor light usage scratches. Last photo shows how it is used and hangs. Price is for one Shade only.

Lighting Replacement Lampshade for use in Antique, Vintage or Contemporary Kerosene, Oil or Electric Light Fixtures. Made especially to fit a Zebulon Oil Lamp of borosilicate glass. Also great for use with Wall Sconces or Candle Holders. American made in U.S.A. Clear glass lightshade, 2mm thick glass, Double open flame polished rims. This shade must set upright, it has no flange. Measures: Height: approx 4 3/8 inches (110mm). Inner Opening: approx 1 5/8 inches (41mm) diameter. Width: approx 1 3/4 inches (45mm) diameter to outer edges, made for a inch holder. Brand New. Price is for one Shade only.

Flawed Lighting Replacement LampShade for use in Antique, Vintage or Contemporary Electric Light Fixtures. Light Cover For use with Wall Sconce or Bracket, Hanging Kitchen Pendant Lamp, Chandelier, Pendant or Pool Table Light Fixture. Great for Kitchen, Living Room, Dining Room, Bedroom, Office, Bathroom, Laundry, Hallway, Porch, Work Areas or Commerical Buildings. Blown Clear Cased over Opal White Milk glass lightshade, cone shape with saw cut and ground rim. This Shade is held in place by 3 set screws (not included). Measures: Height: approximately 5 inches. Flare Rim Width: approximately 10 inches diameter. Fitter Opening: approximately 1 5/8 inches diameter. Fitter Width: approximately 2 1/4 inches diameter to outer edges. Gently Used. No chips, cracks. Saw cut and ground rims may have normal tiny nicks on the edges. May have minor light usage scratches or a tiny bubble pop. NOTE: Has a long swirled white streak within the glass. (See photos). Price is for one Shade only.

Lighting Replacement LampShade for your Vintage, Antique or Contemporary Kerosene, Oil or Electric Lamp. Clear Glass lightshade, 3/4 frosted, pie crimp top rim. Measures: Height: 9 3/4 inches. Top: approx 3 inches diameter. Bulge: approx 4 1/2 inches diameter at widest. Fitter neck Height: approx 1 1/4 inches. Fitter: Approx 3 1/2 inches diameter. Gently Used. No chips or cracks. Frosted part has metal marks around the top of the fitter, which probably will not show in the lamp. Price is for one.

Lighting Replacement Lampshade for Antique, Vintage or Contemporary Vanity or Table Lamp, Wall Sconce or Hanging Chandelier. Hand Blown Opal White Milk Glass Lightshade with crimped top rim, flame polished fitter rim. Measures: Height: approx 7 1/2 inches. Top rim: approx 3 inches diameter. Bulge: approx 4 inches diameter. Fitter Neck Height: approx 5/8 inch. Fitter: approx 3 inches diameter to outside edges. Gently Used. No chips, cracks. One 1/4 inch area of rub scratches on bulge. Price is for one.

Williamsburg style Lighting Replacement Lampshade for Antique, Vintage or Contemporary Candle Holder, Candelabra, Wall Sconce, or Hanging Chandelier Light Fixture. Clear glass lightshade, straight upper flame polished rim. This shade must set upright, it has no flange. Measures: Height: approx 6 1/2 inches. Top Flare Rim Width: approx 3 3/4 inches diameter. Fitter Neck Height: approx 3/8 inch, included in total height. Fitter Neck Opening: approx 1 inch diameter. Fitter Width: approx 1 3/16 inches diameter to outer edges. Used. Has slight horizontal rings in the glass. May have a few light minor scratches. All white spots in photo are light glare. Price is for one.

Lighting Replacement Lampshade for Antique, Vintage or Contemporary Ceiling, Fan or Wall Light Fixture. Blown Opal Milk glass lightshade, Rounded Square Shape, saw cut round fitter rim. This neckless Light cover or shade is probably held in place by a spring bar attached to the fixture, which inserts into the opening. There is no lip (flange). Measures: Height: approx 5 3/4 inches. Bulge Width: approx 13 inches diameter. Fitter Width: approx 11 1/2 inches diameter to outer edges. Gently Used. No chips, cracks. Does have some very minor rub scratches. Fitter is Round. Price is for one.

Danish Modern Mid Century Lighting Replacement LampShade or cover for use in Antique, Vintage or Contemporary Candle Holders or Electric Wall Sconce, Chandelier, Hanging Pendant Light Fixtures. Great for Kitchen, Living Room, Dining Room, Bedroom, Bathroom and Hallways. Excellent addition to your Disaster Emergency Survival Supplies. Quality Blown borosilicate glass lightshade, Cobalt Blue flash spray painted stain on the glass, Double Open Ended Tube Cylinder, with flame polished rims. This shade has no flange, it must set upright in the holder, and it has no drilled holes. Measures: Height: approx 8 inches. Fitter Width: approx 3 inches diameter to outer edges. Brand New. NOTE: There are two teenie pin prick size scratches to the blue painted finish which show light through. (See photos) Price is for one Shade only.

Mid Century Danish Modern Lighting Replacement LampShade or cover for use in Antique, Vintage or Contemporary or Candle Holders or Electric Wall Sconce, Chandelier, or Hanging Pendant Light Fixtures. Great for Kitchen, Living Room, Dining Room, Bedroom, Bathroom and Hallways. Excellent addition to your Disaster Emergency Survival Supplies. Quality Blown borosilicate glass lightshade, Dark Amber Brown Permanent stain fused into the glass, Double Open Ended Tube Cylinder, with flame polished rims. This shade has no flange, it must set upright in the holder, and it has no drilled holes. Measures: Height: approx 8 inches. Fitter Width: approx 3 inches diameter to outer edges. Brand New. Price is for one Shade only.

Lighting Replacement LampShade or cover for use in Antique, Vintage or Contemporary Electric Wall Sconce and Chandelier or Flame Candle Holders. Mid Century Danish Modern Style. Great for Kitchen, Living Room, Dining Room, Bedroom, Bathroom and Hallways. Excellent addition to your Emergency Disaster Survival Supplies. Quality Blown Clear Borosilicate glass lightshade, Double open ended tube, flame polished rims. This shade has no flange, it must set upright in the holder. Measures: Height: approx 9 inches. Fitter Width: approx 2 15/16 inches diameter to outer edges, made for a 3 inch holder. Brand New. Price is for one Shade only.

A vintage Mid Century hurricane style white milk glass lamp shade with crimped or ruffled rim and hobnail beaded decoration, for hanging or table lamps. It's a little over 8 inches high by 7-1/4 diameter at the widest point with a 3 inch diameter fitter rim. In excellent condition with no chips or damage. Two identical shades are available, price is for each.

This vintage Mid Century light shade for a ceiling fixture in whit beaded or hobnail glass (clear glass painted white) is about 8-1/2 inches diameter, just over 9 inches high from the rim to the brass colored finial base tip. The fitter opening is 3-7/8 inches diameter across the outside edges, 3-1/8 at the inside. One of the raised beads has a small wear flake to the white paint, otherwise the shade is in excellent condition with no damage.

Lighting Replacement LampShade for use in Antique, Vintage or Contemporary Electric, Kerosene, or Oil Light Fixtures. Light Cover For use with Gone with the Wind, Banquet or Parlor Table Lamp. Great for Living Room, Dining Room, Bedroom, Study, Library or Office. Blown Clear glass lightshade, Satin Frosted, Etched with Bows and Wreaths pattern, sprayed Cranberry Tint, with ground rims. This shade has no flange and must set upright. Measures: Height: approximately 8 1/2 inches. Top Opening Width: approximately 3 inches diameter. Bulge Width: approximately 9 inches diameter. Fitter Neck Height: approximately 1/2 inches. Fitter Neck Opening: approximately 3 3/4 inches diameter. Fitter Width: approximately 4 inches diameter to outer edges. Brand New. Price is for one Shade only.

Lighting Replacement LampShade for use in Antique, Vintage or Contemporary Kerosene, Oil or Electric Light Fixtures. Light Cover For use with Wall Sconce, Pendant, Chandelier or Ceiling Fan Light Fixture. Great for Kitchen, Living Room, Dining Room, Bedroom, Office, Bathroom, or Hallway. Hand Blown Clear glass lightshade, Satin Frosted, Etched Flowers, Cranberry Tinted crimped flame polished rim. This Shade is held in place by 3 set screws (not included). Measures: Height: approximately 5 inches. Top Flare Rim Width: approximately 7 3/4 inches diameter. Fitter Width: approximately 3 7/8 inches diameter to outer edges, made for a 4 inch holder. Brand New. Saw cut fitter may have the usual flea nicks along the edges. Price is for one Shade.

Lighting Replacement LampShade for use in Antique, Vintage or Contemporary Kerosene, Oil or Electric Light Fixtures. Light Cover For use with Student Table, Desk, Tension Pole or Floor Lamp, Wall Sconce or Bracket, or Chandelier Light Fixture. Great for Living Room, Dining Room, Bedroom, or Office. Excellent addition to your Prepper Survival Preparedness Supplies. Hand Blown Pressed Clear glass lightshade, Diamond Quilted and Bead pattern, with Cranberry flashed on paint, crimped top, saw cut and ground fitter rim. This shade sets on a tripod or ring shade holder. Measures: Height: approximately 6 inches. Top Flare Rim Width: approximately 4 1/2 inches diameter. Bulge Width: approximately 6 3/4 inches diameter. Fitter Width: approximately 6 7/8 inches diameter to outer edges, made for a 7 inch holder. Brand New. Saw cut fitter may have the usual minor flea nicks along the edges. Price is for one Shade only.

Flawed Lighting Replacement Lampshade for Antique, Vintage or Contemporary Kerosene Oil Burners or Electric Tension Pole Lamp or Hanging Chandelier Light Fixture, Parlor Table, Banquet, or Student Desk Lamp. American Made in U.S.A. Opal glass, Melon panels, crimped upper rim. Measures: Height: 5 1/2 inches. Bulge Width: 8 inches diameter. Neck opening: approx 3 inches diameter. Top Flare Rim: 5 1/4 inches diameter. Fitter diameter to outer edge: 6 3/4 inches, made for a 7 inch ring or tripod holder. Brand New. NOTE: It has tiny black specks and spots around the neck and some brown specks and a 1/4 inch spot on underside, just above the fitter. Saw cut fitter rim does have the usual nicks along the edges. (See Photos). Price is for one, reduced due to flaws.

Flawed Lighting Replacement Lampshade for Antique, Vintage or Contemporary Banquet, Parlor, or Table Lamp. Opal White Milk glass lightshade, with raised Roses . This shade must set upright, it has a straight fitter, no flange or lip. Measures: Height: approx 8 1/4 inches. Top Rim Width: approx 4 inches diameter. Bulge Width: approx 8 1/2 inches diameter. Fitter Neck Height: approx 3/4 inches. Fitter Neck Opening: approx 3 3/4 inches diameter. Fitter Width: approx 4 1/8 inches diameter to outer edges. Please Measure carefully to insure proper fit. Your Shade Fitter must be just slightly smaller than the opening that it will fit into and wide enough to slip over the chimney you plan to use. Brand New. Note: This shade has Mfg Flaws. This shade has a somewhat lumpy texture and streaks in the glass which do show slightly when lighted, plus a few very tiny light brown pin head sized or smaller specs. I have tried to show flaws in pics but they were very difficult to capture with camera. It is still a beautiful shade. Note: Variances of Impressions and Occasional bubbles, ripples, streaks or minor flaws within or on the surface are customary to machine blown, hand blown, pressed or handcrafted glass. Price is for one, price low due to flaws.

Lighting Replacement LampShade for use in Antique, Vintage or Contemporary Electric Light Fixtures. Light Cover For use with Wall Sconce, Chandelier, Hanging Kitchen Lamp, Pendant or Ceiling Fan Light Fixture. Great for Kitchen, Living Room, Dining Room, Bedroom, Office, Bathroom, Laundry, or Hallway. Made in Mexico. Blown Opaque White Milk glass lightshade, plain cone shape with flame polished rims. This Shade is held in place by 3 set screws (not included). Measures: Height: approximately 5 inches. Flare Rim Width: approximately 9 3/8 inches diameter. Fitter Neck Opening: approximately 2 3/4 inches diameter. Fitter Width: approximately 3 3/16 inches diameter to outer edges, made for a 3 1/4 inch holder. Brand New. Price is for one Shade only.

5 3/4 diam, 3 1/4 outside x 2 3/4 inside, very good

about 9 1/2 diam., neck opening 3 1/4 , outside 4 , very good.

Lighting Replacement Lampshade for Wall Sconce, Hanging Chandelier Light, Waterfall Lamp, or Fan Fixture. Blown clear over opal milk glass, gold iridescent band, rust stripes, 2 floral rose decals of muted orange red, bright rust brown, gray, gold, and yellow, crimped ruffled rim. Measures: Height: approx 4 1/4 inches. Flare Width: approx 5 to 5 1/4 inches diameter. Fitter: approx 2 1/8 inches to outer edges, made to fit a 2 1/4 inch fixture. Gently Used. No chips, cracks, scratches. Normal nicks along the fitter rim. Price is for one.

Lighting Replacement Lampshade for use in Antique, Vintage or Contemporary Pendant, Flush Mount or Semi-Drop Ceiling Fixture, or Hanging Swag Lamp. Great Light Cover for Kitchen, Living Room, Dining Room, Bedroom, Office, Hallway, or Porch. American made in U.S.A. Hand Blown Opal White Glass pendant Lightshade, Art Deco Skyscraper Shape made from a circa 1930 original mold. This shade is held in place by set screws (not included). Measures: Depth: approx 16 1/2 inches. Bulge Width: approx 9 inches diameter. Fitter: approx 5 7/8 inches diameter to outside edges, made for a 6 inch fixture. Brand New. Fitter rim does have the usual roughness and/or nicks from cutting. Price is for one.

Lovely and old hanging light shade. Hung from small chain hooked into the socket. This one is pink with a fan pattern. Excellent condition. Measures 4 tall by 10 ¼ across.

Lighting Replacement Lampshade for Antique, Vintage or Contemporary Wall Sconce, Candle Holder, Swag Pendant Lamp, Hanging Chandelier Light Fixture or many other uses. Quality Clear glass lightshade, hollow tube, open on both ends, flame polished rims. Great Emergency Disaster Survival Supplies. This shade must set upright, it has no flange. Measures: Height: approx 11 inches. Width: approx 2 inches diameter. Brand New. Price is for one.

Lighting Replacement Lampshade for Antique, Vintage or Contemporary Candle Holder, Wall Sconce, Swag Lamp or Pendant Light Fixture. Various other uses. Excellent Quality Clear Borosilicate glass lightshade, both ends are open. This shade must set upright in holder, it has no lip flange. Measures: Height: 4 inches. Width: 4 inches diameter to outer edges. Brand New. All spots seen in photo are light glare. Price is for one.

Flawed Victorian Style Lighting Replacement Lampshade for a Antique or Vintage Contemporary Electric, Kerosene or Oil Gwtw Banquet Table or Parlor Lamp. Hand Blown Clear Satin Glass, sprayed Ruby Red interior, with embossed Grape design. American made in USA. Measures: Height: 10 inches Width: 10 inches diameter Top opening: 3.75 inches diameter Fitter opening: 3 5/8 inches diameter Fitter: 4 inches diameter to outer edge Brand New but flawed. No chips or cracks. Has several Bubbles in the glass, two grinding scraps and sticker residue (see photos). All flaws are towards one side, so could be turned to the back side. Price is for one.

Great old lamp shade from Hy-Glo, tag reads Audrey Hand Painted, Hy-Glo Washable parchmentized shade. It has the picture of an iris on it. Still with 80% of the original cellophane wrapping left. For a smaller lamp. Uses the clamp on bulb to hold on. Measures 6 tall by 8 across the base and 6 across the top. Free Shipping on this item.

Lighting Replacement LampShade Only made for use with The Mid Century Modern Laurel Table and Floor Lamps. Could also be used with a Antique, Vintage or Contemporary Electric Hanging Swags, Semi Drop Ceiling or Fan Light Fixture. American made in U.S.A. Hand Blown Cased Clear over Bright White glass lightshade, Mushroom shape, Frosted Acid Matte finish, ground neckless rim with no lip. This Neckless shade is held in place by a spring bar which inserts into the opening or can be held in place with a Shade ring (Not Included) which screws onto a threaded light socket, inside the shade. Measures: Height: approximately 7 inches. Bulge Width: approximately 12 1/4 inches diameter. Fitter Opening: approximately 3 3/8 inches diameter. Brand New. Occasional Bubbles in glass just like old ones. Price is for one Shade only.

Flawed Lighting Replacement Lampshade for Antique, Vintage or Contemporary Hanging Light Fixture, Student Desk or Table Lamp. Opal Blown glass lightshade, Crimped Top rim. This shade sets on a tripod or ring holder. Measures: Height: approx 7 1/2 inches. Top Rim Width: approx 5 inches diameter. Bulge Width: approx 11 1/4 inches diameter. Fitter Neck Opening: approx 3 1/8 inches diameter. Fitter Width: approx 9 3/4 inches diameter to outer edges, made for a 10 inch ring. Brand New but Flawed. May have one of the following flaws: 1. The Crimps are slightly uneven, stand up straight and are bent slightly inward, rather than down like they should. (See Photos). 2. Shallow chip on inside edge of the fitter. Is thick glass and should not be an issue and will not show when in use. Saw cut fitter does have the usual flea nicks along the edges. Price is for one.

Lighting Replacement Lampshade for Antique, Vintage or Contemporary Candle Holder, Wall Sconce, Swag Lamp or Pendant Light Fixture. Various other uses. Excellent Quality Clear Borosilicate glass lightshade, both ends are open with polished rims. This shade must set upright in holder, it has no lip flange. Measures: Width: 4 inches diameter to outer edges. Height: 16 inches. Brand New. Price is for one. May need to be higher.

Lighting Replacement Lampshade for Antique, Vintage or Contemporary Candle Holder, Wall Sconce, Swag Lamp or Pendant Light Fixture. Excellent Quality Clear Borosilicate glass lightshade, tubing with both ends open, with polished rims. This tubing has various other uses. This shade must set upright in holder, it has no lip flange. Measures: Height: 7 inches. Width: 3 15/16 inches (100mm) diameter to outer edges. Brand New. All spots seen in photo are light glare. Price is for one.

Lighting Replacement Lampshade for Antique, Vintage or Contemporary Wall Sconce, Hanging Chandelier or Ceiling Fan Light Fixture. Transparent Amber glass lightshade, with light iridescent finish, bell shape, interior rib optic, gently scalloped flame polished rim. This shade is held in place by 3 set screws (not included). Measures: Height: approx 4 3/8 inches. Flare Rim Width: approx 4 5/8 inches diameter. Fitter Neck Opening: approx 1 3/4 inches diameter. Fitter Width: approx 2 1/4 inches diameter. Gently Used. No chips, cracks. Some signs of usage to the finish. Saw cut fitter does have the usual flea nicks along the edges. THEY ARE NOT ALL THE SAME WEIGHT, two are delicate, the other is more solid, thicker glass, but they are the same size. Price is for one.

Lighting Replacement LampShade for use in Antique, Vintage or Contemporary Electric Light Fixtures. Light Cover For use with Chandelier, Wall Sconce, Pendant or Ceiling Fan Light Fixture. Great for Living Room, Dining Room, Kitchen, Bedroom, Office, Bathroom, or Hallway. Hand Blown Pressed Clear glass lightshade, Satin finish on Ribbed Bell Shape, attached plain gold (brass tone) metal rim. This Shade is held in place by 3 set screws (not included). Measures: Height: approximately 5 3/4 inches. Flare Rim Width: approximately 7 inches diameter. Fitter Width: approximately 3 1/16 inches diameter to outer edges, made for a 3 1/4 inch holder. Brand New. Price is for one Shade only.

Lighting Replacement Lampshade for Antique, Vintage or Contemporary Wall Sconce, Candle Holder, Swag Lamp or Pendant Light Fixture. Various other uses. Excellent Quality Borosilicate Clear glass lightshade, both ends are open with polished rims. This shade must set upright in holder, it has no lip flange. Measures: Height: 15 inches. Width: 4 1/2 inches diameter to outer edges. Brand New. All spots seen in photo are light glare. Price is for one.

Gorgeous Lighting Replacement LampShade or cover for use in a Antique, Vintage or Contemporary Wall Sconce, Candle Holders, Candelabra or Electric Chandelier. Great for Living Room, Dining Room, Bedroom, and Hallways. Excellent addition to your Prepper Survival Preparedness Supplies. Hand Blown Clear glass lightshade, flashed on painted Ruby Red Color (not Cranberry), Cut and Etched Bunches of Grapes and Grape Vines, flame polished rims. This shade has no flange, it may set upright in the holder OR it may be used at an angle,slipped into a holder and then attached with a Shade ring (Not Included) from inside the shade. Measures: Height: approx 8 inches. Top Flare Rim Width: approx 4 5/8 inches diameter. Fitter Neck Height: approx 7/8 inches. Fitter Neck Opening: approx 1 3/8 inches diameter. Fitter Width: approx 1 5/8 inches diameter to outer edges Brand New. Price is for one Shade only.

We are offering a frosted heavy glass ceiling shade from the 1930s-40s with an Art Deco design. Groups of embossed lines spread from the center to the edge where clear glass triangles allow the light to shimmer through. The center bolt is removable if not needed. Condition: very good with no physical damage Size: 16 inches wide 3 inches deep If you wish to know shipping cost before ordering please email us.

Mid Century Danish Modern Eames Era Lighting Replacement LampShade for use in Antique, Vintage or Contemporary Electric Light Fixtures. For use with Floor or Tension Pole Lamp or Hanging Pendant Light Fixture. Great for Living Room, Dining Room, Bedroom, or Office. Blown Pressed Clear glass lightshade, ribbed swirl optic pattern, flame polished and partially ground rim. Threaded Fitter. This shade is threaded and screws into the light fixture. Measures: Height: approximately 5 1/2 inches, including threaded portion. Top Rim Width: approximately 3 inches diameter. Bulge Width: approximately 5 inches diameter. Fitter Neck Height: approximately 1/2 inch. Fitter Neck Opening: approximately 1 5/8 inches diameter. Threaded Fitter Width: approximately 2 inches diameter to outer edges. Gently Used. No cracks. May be a few Light Usage Scratches and some minor small nicks around the screw fitter rim. Top rim has been ground even in a few places, but this is from the manufacturer. Price is for one Shade only.

Lighting Replacement LampShade for use in Antique, Vintage or Contemporary Electric Light Fixtures. For use with Chandelier, Wall Sconce, Ceiling Fan or Pendant Light Fixture. Great for Kitchen, Living Room, Dining Room, Bedroom, Office, Bathroom, or Hallway. Hand Blown Clear Cased over Opal White Milk glass lightshade, bell shape, decorated with two decals of White Blossoms on Branches, Amber Iridescent spray below Ruffled Crimped flame polished rim. This Shade is held in place by 3 set screws (not included). Measures: Height: approximately 4 1/4 inches. Top Flare Rim Width: approximately 5 1/4 inches diameter. Fitter Neck Opening: approximately 1 5/8 inches diameter. Fitter Width: approximately 2 1/8 inches diameter to outer edges, made for a 2 1/4 inch holder. Used. Has a chip with crack on the fitter rim. (See Photos). It should not be a problem as long as you turn it away from the set screws and do not screw too tightly. Possible minuscule usage scratches. Saw cut fitter does have the usual flea nicks along the edges. Price is for one Shade.

Lighting Replacement Lampshade for Antique, Vintage or Contemporary Pendant Lamp, Wall Sconce or Hanging Chandelier Light Fixture. Heavy Clear pressed glass lightshade, geometric design of hobnails and beveled ribs, beveled points on rim. This shade is held in place by 3 screws (not included). Measures: Height: approx 6 inches. Flare Rim Width: approx 4 1/4 inches diameter. Bulge Width: approx 4 1/2 inches diameter. Fitter Width: approx 3 3/16 inches diameter to outer edges, made for a 3 1/4 inch fixture. Gently Used. Like new. No chips, cracks, scratches. Possible bubbles in the glass. Saw cut fitter does have the usual flea nicks along the edges. Price is for one.

Genuine Aladdin Brand Lighting Replacement LampShade for use in Antique, Vintage or Contemporary Kerosene, Oil or Electric Light Fixtures. For use with Wall Bracket Light, Student Desk, Table or Hanging Lamp Fixture. Great for Kitchen, Living Room, Dining Room, Bedroom, or Office. American made in U.S.A. Marked Aladdin. Blown Pressed Crystal Clear glass lightshade, Partially Frosted, Raised Oval Panels Decorated with hand painted Rose Pink Roses and trim, ground bottom rim. This shade sets on a tripod or ring shade holder. Measures: Height: approximately 8 1/2 inches. Top Flare Rim Width: approximately 5 inches diameter. Bulge Width: approximately 11 inches diameter. Neck Opening: approximately 3 1/2 inches diameter. Fitter Width: approximately 9 3/4 inches diameter to outer hobnail edges, made for a 10 inch holder. Brand New. Price is for one Shade.

Genuine Aladdin Brand Model 12 Lighting Replacement LampShade for use in Antique, Vintage or Contemporary Kerosene, Oil or Electric Light Fixtures. For use with Hanging, Student Desk, or Table Lamp, Wall Bracket Light Fixture. Great for Kitchen, Living Room, Dining Room, Bedroom, or Office. American made in U.S.A. Marked Aladdin. Blown Pressed Frosted Crystal Clear glass lightshade, Clear Ribbed bottom, Decorated with hand painted Yellow Buttercups, ground top and bottom rim. This shade sets on a tripod or ring shade holder. Measures: Height: approximately 8 1/4 inches. Top Flare Rim Width: approximately 4 3/4 inches diameter. Bulge Width: approximately 11 1/4 inches diameter. Neck Opening: approximately 3 1/2 inches diameter. Fitter Width: approximately 9 7/8 inches diameter to outer edges, made for a 10 inch holder. Brand New. Price is for one Shade.

Lighting Replacement LampShade for use in Antique, Vintage or Contemporary Kerosene, Oil or Electric Light Fixtures. For use with Hanging Lamp, Wall Bracket Light Fixture, Student Desk or Table. Great for Kitchen, Living Room, Dining Room, Bedroom, or Office. American made in U.S.A. Marked Aladdin. Blown Pressed Clear Cased over Opal White Milk glass lightshade, sprayed green top and bottom ribbed rim. Decorated with hand painted Violets, ground top and bottom rim. This shade sets on a tripod or ring shade holder. Measures: Height: approximately 8 1/8 inches. Top Flare Rim Width: approximately 4 3/4 inches diameter. Bulge Width: approximately 11 1/4 inches diameter. Neck Opening: approximately3 1/4 inches diameter. Fitter Width: approximately 9 7/8 inches diameter to outer edges, made for a 10 inch holder. Brand New. Price is for one Shade only.

This lamp shade stands 7.25 in. tall. It has a 3 in. diameter base and is 8 in. diameter at the widest area. In very good, usable condition. Satin finish with a floral decoration. Creamy yellow with a rusty persimmon top area. Colors say sixties to me. No makers marks.

A retro ceiling light shade that is 14 in. diameter. Approximately 4 in. deep. Decorated with a floral design of yellow and separated with black and gold sections all on a pebbly white textured glass base. This must ship USPS Parcel Post due to its size. In very good, usable condition.

A decorated glass lamp shade. 10.75 in. tall. The top is 6.5 in. diameter and the base 11.75 in. diameter. The widest area is 14 in. diameter. In very good, usable condition. Decorated with fruit, vines and leaf design. This must ship via USPS Parcel Post due to its size and weight.

Lighting Replacement LampShade for use in Antique, Vintage or Contemporary Kerosene, Oil or Electric Light Fixtures. For use with Wall Sconce, Chandelier, Pendant, or Ceiling Fan Light Fixture. Great for Kitchen, Living Room, Dining Room, Bedroom, Office, Bathroom, or Hallway. Cut and Etched Lead Crystal glass lightshade, Flowers in 3 Ovals surrounded with Lattice, ground flare rim. It rings when thumped. This Shade is held in place by 3 set screws (not included). Measures: Height: approximately 5 inches. Top Flare Rim Width: approximately 4 1/2 inches diameter. Fitter Neck Opening: approximately 1 5/8 inches diameter. Fitter Width: approximately 2 inches diameter to outer edges, made for a 2 1/4 inch holder. Gently Used. No chips, cracks. Has minor cutting streaks and usage scratches. Ground fitter rim. Price is for one.

Flawed Lighting Replacement Lampshade for use in Vintage, Antique or Contemporary Kerosene, Oil or Electric Light Fixtures. For Aladdin Lamps, Student Desk or Table Lamps, Wall Sconces or Brackets, Chandeliers, Hanging Kitchen or Library Lamps. Hand Blown, Pressed glass lightshade, bright green, with raised diamonds and beads quilted pattern, hobnails around the neck, crimped upper rim. Great for Kitchen, Living Room, Dining Room, Bedroom, Office, or Entryway. This shade sets on a tripod or ring holder. Measures: Height: approx 6 1/2 inches. Top Flare Rim Width: approx 4 3/4 inches diameter. Bulge Width: approx 11 inches diameter. Neck Opening: approx 3 inches diameter. Fitter Width: approx 9 7/8 inches diameter to outer edges made for a 10 inch holder. Flawed. No chips or cracks, but has a streak in the glass which starts about 3 1/4 inches above the base, and swirls around to 1 1/2 inches above the base. (See Photos) Price is for one.

Lighting Replacement LampShade for use in Antique, Vintage or Contemporary Kerosene, Oil or Electric Light Fixtures. 2 Currier & Ives Scenes. Catching a Trout, 3 men fishing in boat putting fish in net and Wild Duck Shooting, 2 Men with Bird Dogs and Ducks. Great for use with Student Desk or Table, Hanging Kitchen or Libray Style Lamp, Wall Sconce or Bracket, or Chandelier Light Fixture. Excellent addition to your Prepper Survival Preparedness Supplies. Use in Kitchen, Living Room, Den, Bar, Bedroom, Office, Family Room. American made in U.S.A. Hand Blown Opal White glass lightshade, Sprayed Green to Cream Tint, Two Currier & Ives Decals, Straight top saw cut rim. This shade sets on a tripod or ring shade holder. Measures: Height: approx 7 inches. Top Flare Rim Width: approx 5 inches diameter. Bulge Width: approx 9 3/4 inches diameter. Neck Opening: approx 3 3/8 inches diameter. Fitter Width: approx 9 3/4 inches diameter to outer edges, made for a 10 inch holder. Brand New. Saw cut top and bottom rims do have the usual flea nicks along the edges. Price is for one Shade.