TIAS.com has over a half a million antiques and collectibles for your online shopping pleasure
Call Us 1-888-OLD-STUFF  | Your Account  | Merchant Login  | Shopping Cart  | Wish List  | Help
View Today's
Newly Listed Items!
Click here to view new listings

Sell Your Antiques & Collectibles Here

Free Trial Offer!
The TIAS Trusted
Merchant Guarantee
Safe Online Shopping Since 1995
Advanced
Search
 Be Our Facebook Fan
 Follow us on Twitter

Architectural Antiques: Hardware


What's New in the Collector's Showcase of Architectural Antiques: Hardware?
The Most Recent Additions to This Category are First!
A very nice old set of solid brass bathroom fixtures made by Czech and Speake in the early 1900’s.  This great old fixture group features two Towel Holders, both measuring 18 inches across.  The Toilet roll holder is cast brass with a ceramic roller which bears the maker’s names; Czech & Speake.  Finally the cup / toothbrush holder is also solid brass and very heavy with a wonderfully detailed design.  The set also has the original mounting screws and has not been cleaned or polished beyond a light wipe-down, so if you like aged brass, this set has the age patina you’re after.  On the other hand, if you prefer your brass highly polished, I can promise this set will sparkle with just a little effort.    This is a pair of antique figural tin cabinet drawer handles with cast iron drop pulls made in England in the Art Nouveau period or late Victorian period, 1890-1900. The unusual and decorative art nouveau drawer pulls each measure 2.5 inches high by 1.25 inches wide and each feature a face on the drop pull. The body is tin a typical art nouveau design of foliage or leaves. There are holes for attachment but I do not have the screws. The pulls have great patina and they were gilded with some gold left in places. The drawer pulls are in very good +++ condition with no cracks or other damage. They are marked with a RD number, but I can't read other that the RD. These are part of a hardware group I acquired in Falmouth, Cornwall England.  Great Antique wooden display piece.  A large hand lettered sign or tailgate that reads;  Robinson Mfg. Co. Patented 1911. The old piece was purchased at a sale decades ago and has evidently been well cared for and kept safe for most of its 100 year lifetime.  The board is large, measuring 62 ½ x 21 ¼ x 1 ¼ inches thick.  The face has a clear protective lacquer finish which may be original, but the hand painted name and patent information are without a doubt the original work.  I was told this piece was purchased while the couple who bought the piece were on a road trip in the late 70’s, and had gone from Pennsylvania to visit Nashville, Atlanta, Mobile, New Orleans, and quite a few other Southern and Gulf States locations.  The family could not pinpoint from which state the sign was purchased, but I believe the patent numbers that are also hand painted beneath the Patent Date would prove a useful tool for investigating the history of this unusual early 1900’s item.  What a great gift for anyone with the Robinson name, or for that matter, a great office addition for any company with the Robinson name.    

 Contemporary Salvaged Antiqued Bronze Metal Cabinet Door Pull. This great salvaged pull is 4-1/4" long, has a 2-1/2" boring and projects 1-1/2" from the surface it is attached to. It comes with screws and is in good condition with small indications of use. I have multiples of this item.

Antique 4 pc. Solid Brass Bath Fixture $249.00

 

Figural Art Nouveau 2 Cabinet Drawer Pul $38.00

 

1911 Robinson Mfg. Co. Wood Sign / Tailg $889.00

 

Contemporary Salvaged Antiqued Bronze Me $3.99

This is a set of antique hardware pieces consisting of 2 mold blown glass doorknobs measuring 2 inches in diameter on their shaft, 2 plates with keyholes measuring 6 inches high by 2 inches wide and the door latch mechanism. I am pretty sure the set is complete and came in a lot of hardware from an old house. Very hard to find with all the pieces.  A metal toothbrush and tumbler that mounts on your bathroom wall. Holds a 3 in. diameter tumbler and has slots to hold up to 6 toothbrushes. Measures 6 in. long and is 3.5 in. tall. In usable condition. Silvertone finish. I think it may clean up a bit better than I have done. May be chrome finish.  This is a set of 10 original cast 2 piece vintage brass drawer hardware pulls with drops and the original hardware made by L P, Lowden and Poole, Birmingham England dating to 1920s in original condition and patina. Each of the pretty drawer pulls with drop measures 3 inches long by 1.5 inches wide by .5 inch deep. All of the vintage hardware drawer or cabinet pulls is in very good +++ condition. The set is marked L P and has the style number 743715 which indicates the 1920s.  I found the set at an antiques market in Gloucester, England. It is rare to find such a nice, intact and well marked set from that era. A real find!  ivory or off white 1920's - 1940's bakelite these are cracked at the hole for the screw still useable

Antique Glass Doorknobs Plates and Hardw $78.00

 

Silver / Chrome Toothbrush & Tumbler Holde $37.50

 

Brass Drawer Pulls Drops UK Set Of 10 W / $98.00

 

Ivory Socked Plate Cover $1.00

off white or ivory 1920's - 1940's bakelite  off white or ivory bakelite 1920's - 1940's  off white or ivory bakelite era 1920's - 1940's  Vintage Single Cast Iron Door Hinge. This hinge is 3" x 3" and it has been painted. It is in the condition as shown.

Cover Plate $1.50

 

Socked Plate Cover $1.50

 

Switch Plate Cover $1.50

 

Vintage Single Cast Iron Door Hinge $24.95

This is a pair of antique stamped gilded tin cabinet drawer pulls with cast iron handles made in England in the Art Nouveau period or late Victorian period, 1890-1900. The drawer pulls each measure 2 inches high by 4 inches wide. The body is tin a typical art nouveau design of foliage or leaves. There are holes for attachment but I do not have the screws. The pulls have great patina and they were gilded with some gold left in places. The drawer pulls are in very good +++ condition with no cracks or other damage, with a few minor specks of rust. These are part of a hardware group I acquired in Falmouth, Cornwall England.  this brass tone reproduction of a antique mechanical doorbell 4 inches wide if you more info please ask made by Whittington doorbells  This is a set of 10 original cast 2 piece Victorian drawer hardware pulls with drops and the original hardware made by C & A, Croft and Assinder, Birmingham England with the registry date for 1884. Each of the pretty drawer pulls with drop measures 3 inches long by 2 inches wide by .75 inch deep. All of the antique hardware drawer or cabinet pulls is in very good +++ condition. I found the set at an antiques market in Gloucester, England. It is rare to find such a nice, intact and well marked set from that era. A real find!  This is a pair of antique stamped tin cabinet drawer pulls with cast iron handles made in England in the Art Nouveau period or late Victorian period, 1890-1900. The drawer pulls each measure 2.5 inches high by 3.5 inches wide. The body is tin with a raised oval center and a typical art nouveau design of leaves. There are 4 holes for attachment but I do not have the screws. The pulls have great patina and they were gilded with some gold left in places. The drawer pulls are in very good +++ condition with no cracks or other damage, with a few minor specks of rust. These are part of a hardware group I acquired in Falmouth, Cornwall England.

Art Nouveau 2 Cabinet Drawer Pulls Folia $38.00

 

Victorian Doorbell $30.00

 

Victorian 10 Drawer Drop Pulls Set W / Fi $128.00

 

Art Nouveau Cabinet Drawer Pull Pair Lea $38.00

This is a pair of antique stamped tin cabinet drawer pulls with cast iron handles made in England in the late Victorian period, 1880-1890. The drawer pulls each measure 2.5 inches high by 4.5 inches wide. The body is tin with a raised oval center and fancy scalloped edge and the handle itself is cast iron that were riveted on. There are 2 holes for attachment but I do not have the screws. The pulls have great patina. From the look of the back, they were gilded at one time but that is mostly gone on the front, leaving only traces. The drawer pulls are in very good +++ condition with no cracks or other damage.  This is a set of 4 antique bronze drawer or cabinet pulls with a fancy design made in England 1890-1910. Each of the drawer pulls measures 2.75 inches high by 1.5 inches wide and would stands 1 inch away from drawer at the bottom for an area to get your fingers under to pull the drawer open. The drawer pulls were originally gilded but have lost most of the gold. Each of the drawer pulls has it's original screw and has a great patina. The pulls are in very good +++ condition, excellent aside from gilding loss and so decorative!  If you are building or remodelling, this set would make a wonderful addition. Note the beautiful pattern on each door knob and the 2 back plates. The set has been cleaned, oiled, and lacqured. The handle is backset 2 1/4". I'm unfamiliar with the set terminology, but send me email for additional measurements or clarifications. The pictures make the cast iron look brighter than the set is actually a darker color. See the knob photo for a true color.  Antique Turn of the Century Electric Painted Metal Wall Sconce. Very Art-Deco,Elegantly Shaped.Brass Push Button has nice action bounce. Nice. Needs re-painting and re-wiring as you can plainly see. Shipping is 

7.00 Domestic USA Priority (3 days).

Victorian Cabinet Drawer Pull Pair Tin C $28.00

 

Antique Bronze Drawer Pulls Set of 4 Fan $48.00

 

Antique Cast Iron Door Knob Set w / Mortis $68.00

 

Antique 1920 Art-Deco Metal Electric W $6.23

Set of 2 Pulls from an Antique Chest of Drawers recovered from a fire.The maker name was not visible. Very beautifully

sculpted and might be handmade.Hole to Hole measures 3 inches. Screws are included.

Shipping is $4.00 Domestic USA Priority 

Package Insured.  They really look handwrought to me. Set of 2 Pulls. There are Copyright circles on the inside with an Oval next to it but no name BUT there is a number: FO3868 inside each pull. Also they are numbered: 1 on the inside of one pull, 2 inside the other. They Measure 3 inches hole to hole for screws.Screws are included.Shipping is $4.00 USA Domestic USA Priority.(3 days).  Vintage Solid Brass Pineapple Welcome Door Plaque Hardware. This plaque is  6-3/4" long and the pineapples are 2-1/4" tall. It mounts with small nails and they are NOT included. It is in excellent used condition.

  One 34-1/2" Goldtone Curtain Drapery Rod. This rod is 34-1/2" long and has a screw on/off finial end. There is some wear to the finish but it could easily be painted to match any decor. It is substantial and overall it is in good used condition. Shipping weight is 3 pounds.

Antique 1920s-30s Brass Sculpted Drawe $8.90

 

Antique Brass Door / Closet Pulls $8.90

 

Vintage Solid Brass Pineapple Welcome Do $14.95

 

One 34-1 / 2" Goldtone Curtain Draper $14.95

Knape & Volt Mfg. Co. 22" Drawer Slide 1175 Hardware. This old new stock is a KV Drawer Slide 1175, 22" long, has a load capacity of 50 lbs. It mounts with included screws. Shipping weight is 1 pounds. This is ONE slide only and you will need a a pair for one drawer.


 Vintage Solid Brass Entry Door Knocker Pineapple Finial. This nice door knocker was salvaged and is 8-1/2" long x 4-1/2" wide. It is in excellent used condition. Shipping weight is 3 pounds. 

 Vintage Single Bronze Decorative Offset "H" Hinge. This hinges came from an estate sale. It is  3/8" offset and the "H" is 3-1/2" long. It has some rust on the back of the inside flange and does NOT come with mounting screws otherwise it is in good used condition.   

 Single Vintage Copper Spearhead Offset "H" Hinge Italy. This hinge came from an estate auction. It is 3/8" offset and the "H" is 3-5/8" long x approx. 1/2" wide. It is marked; Ferum Italy on the back. It is in good used condition and does NOT come with mounting screws.

Knape & Volt Mfg. Co. 22" Drawer Sl $4.95

 

Vintage Solid Brass Entry Door Knocker P $34.95

 

Vintage Single Bronze Decorative Offset $2.95

 

Single Vintage Copper Spearhead Offset H $3.95

Single Vintage Copper Spearhead Offset "H" Hinge. This hinge came from an estate auction. It is 3/8" offset and the "H" is 3-5/8" long x approx. 1/2" wide. It is in good used condition and does NOT come with mounting screws.

 Vintage Chrome Inset Free Swinging Hinge. This salvaged hinge came from an estate sale. It is 3/8" inset and the exposed portion is 2-1/2" long. It has some corrosion and otherwise it is in good used condition. It does NOT come  with mounting screws.  Vintage Gold Satin Inset Free Swinging Hinge. This salvaged hinge came from an estate sale. It is 3/8" inset and the exposed portion is 2-1/2" long. It is in good used condition. It does NOT come with mounting screws.

 Pair Antique Replacement Drawer Pulls Bail Handles. These pulls or bails are 3-5/8" from end to end. the are in good used condition.

Single Vintage Copper Spearhead Offset H $3.95

 

Vintage Chrome Inset Free Swinging Hinge $2.95

 

Vintage Gold Satin Inset Free Swinging H $2.95

 

Pair Antique Replacement Drawer Pulls Ba $5.95

Vintage Jewelry Storage Box Cast Bronze Door Pull. Ths salvaged pull is 3-1/4" long and attaches with brads (NOT included). It is in excellent used condition.

 Old New Stock Brass Wall Mount Coat Clothes Hook. This hook is 3-1/8" long and is in new condition.

 Old New Stock Pair Brass Rod Brackets. These brackets have a 1" projection and they accomodate a 3/8" dia. rod. They come with mounting screws and they are in new condition.

 Old New Stock Water Closet Attachment Screws. These screws fasten a water closet to wood floors and come with caps and they are in new condition.

Vintage Jewelry Storage Box Cast Bronze $4.95

 

Old New Stock Brass Wall Mount Coat Clot $3.95

 

Old New Stock Pair Brass Rod Brackets $4.95

 

Old New Stock Water Closet Attachment Sc $2.95

Old New Stock Wall Mount Door Stop. This brass stop is 3" long and in new condition.

 Old New Stock Faucet Adapter Screen Plumbing Part. This screen is 15/16" dia. to fit a standard 1" dia. faucet and is in new condition.

 Vintage Solid Brass Surface Hinge Hardware. This salvaged hinge is 4-7/8" long from end to end x 1-1/2" wide. One half has a very slight bend in the metal that will straighten out once it is attached to something. It is in good used condition.

 Vintage Black Cast Iron Surface Hinge Hardware. This salvaged hinge is 5-3/4" long x 3-3/8" wide. There is a break in the metal at the tip of the long end otherwise it is in good used condition.

Old New Stock Wall Mount Door Stop $2.95

 

Old New Stock Faucet Adapter Screen Plum $3.95

 

Vintage Solid Brass Surface Hinge Hardwa $4.95

 

Vintage Black Cast Iron Surface Hinge Ha $9.95

Pair Vintage Stamped Brass Trinket Box Handles Hardware. These salvaged handles are 3-1/8" long and attach with brads (NOT included). They both have wear to the finish and otherwise they are in good used condition.

 Pair Vintage Elliptical Stamped Brass Drawer Pulls Hardware. These salvaged pulls are 3-5/8" long x 15/16" wide and have a 2-1/4" boring. One comes without one mounting screws. They both have some wear and otherwise they are in good used condition.


 Pair Vintage Hepplewhite Style Stamped Brass Drawer Pulls. These salvaged pulls are 2-2/8" long x 1-9/16" wide and have a 2" boring. One comes without the bail handle and they both come with mounting screws. They both have some discolorization and otherwise they are in good used condition.

 Pair Vintage Hepplewhite Style Stamped Brass Drawer Pull. These salvaged pulls are 2-9/16" long x 1-11/16" wide and have a 2" boring. One comes with mounting screw and bail handle and the other does NOT. One has some corrosion and otherwise they are in good used condition.

Pair Vintage Stamped Brass Trinket Box H $4.95

 

Pair Vintage Elliptical Stamped Brass Dr $9.95

 

Pair Vintage Hepplewhite Style Stamped B $9.95

 

Pair Vintage Hepplewhite Style Stamped B $9.95

(2) Vintage Chippendale Stamped Brass Drawer Pulls Hardware. These salvaged pulls are 3-5/8" long x 2-1/2" wide and they have a 3" boring. They are in the Chippendale style. There is some wear to the finish and otherwise are in good used condition. They come with mounting screws.

  Pair Vintage Chippendale Stamped Brass Drawer Pulls Hardware. These salvaged pulls are 3-5/8" long x 2-1/2" wide and they have a 3" boring. They are in the Chippendale style. There is some wear to the finish and otherwise are in good used condition. They do NOT come with mounting screws.

   Vintage Antique Style Stamped Brass Drawer Pull Backplate. This salvaged pull is 3-5/8" long x 2" wide and has a single center boring. It does not have the bail handle but comes with mounting screw and is in good used condition.

 Vintage Painted Solid Brass Surface Hinge. This hinge is 4-1/2" long x 1-1/4" wide and is in good used condition.

(2) Vintage Chippendale Stamped Brass Dr $9.95

 

Pair Vintage Chippendale Stamped Brass D $9.95

 

Vintage Antique Style Stamped Brass Draw $9.95

 

Vintage Painted Solid Brass Surface Hing $9.95

Vintage Faux Key Cabinet Pull Hardware. This old new stock pull is 5-5/8" long x 5/8" wide and comes with mounting screw. It is in excellent condition.

 Vintage Solid Brass Drawer Pull Drop Hardware. This salvaged knob is 2" long and comes with mounting screw. It is in good used condition.

 Vintage Solid Brass Drawer Pull Knob Hardware. This salvaged knob is 7/8" dia. and comes with rosette and mounting screw. It is in good used condition.

 Vintage Copper Metal Drawer Pull Knob Hardware. This salvaged knob is 1-1/8" dia. and it does NOT come with mounting screw. It is in good used condition.

Vintage Faux Key Cabinet Pull Hardware $6.95

 

Vintage Solid Brass Drawer Pull Drop Har $4.95

 

Vintage Solid Brass Drawer Pull Knob Har $3.95

 

Vintage Copper Metal Drawer Pull Knob Ha $3.95

Vintage Solid Brass Drawer Pull Knob Hardware. This salvaged knob is 1" dia. and comes with mounting screw. It is in good used condition.

 Vintage Gold Metal Drawer Pull Knob Hardware. This salvaged knob is 1-1/8" dia. and comes with mounting screw. It has some wear to the finish otherwise it is in good used condition.

 Antique Cast Brass Reticulated Sunflower Pull Knob Hardware. This great salvaged knob is 1-1/4" dia. and is attached to a unthreaded smooth rod. It is in good used condition.

 Antique Cast Brass Star Drawer Pull Knob Hardware. This great salvaged knob is 1-1/2" dia. and comes with rosette and mounting screw. It is in good used condition.

Vintage Solid Brass Drawer Pull Knob Har $4.95

 

Vintage Gold Metal Drawer Pull Knob Hard $2.95

 

Antique Cast Brass Reticulated Sunflower $9.95

 

Antique Cast Brass Star Drawer Pull Knob $9.95

Antique Ornate Brass Drawer Pull Bail Handle. This lovely salvaged bail is 3" long and has a 2-3/4" opening. It is in excellent used condition.

 Vintage Retro Copper Metal Cabinet Door Pull Hardware. This salvaged door pull is 4" long and has a 3-1/2" boring. It has black offset sleeves. It is in good used condition and comes with mounting screws.

 Vintage Black Metal Cabinet Door Pull Hardware. This salvaged door pull is 3-7/8" long and has a 3-1/2" boring. It has gold offset sleeves. It is in good used condition and comes with mounting screws.  Vintage White Enamel Cabinet Door Pull Hardware. This salvaged door pull is 4-3/4" long and has a 3" boring. It is white with a gold stripe around the edge. It is in good used condition and does NOT come with mounting screws.

Antique Ornate Brass Drawer Pull Bail Ha $6.95

 

Vintage Retro Copper Metal Cabinet Door $9.95

 

Vintage Black Metal Cabinet Door Pull Ha $4.95

 

Vintage White Enamel Cabinet Door Pull H $3.95




< prev 1 2 3 4 5 next >

Shops | NEW! Become an Affiliate | Advertise | Security | Privacy | Terms of Use | Question/Problem | Site Map
© Software and site design copyright 1995-2012 TIAS.com. All rights reserved.