Item # |
Description |
Price |
Click for more detail...
Yank143
|
Yankee No. 31A / 131A Slot Bit Screwdriver Tip N.O.S. Large
This is a new old stock .312" / 5/16" diameter, with a slot screwdriver tip, for Yankee style (LARGEST) screwdrivers, like a No. 31, 31A, 131A model Yankee, may fit other brand names as well that accept the Yankee style tooling with the notch and flat on the shank. Each of these screwdriver tips is 4" long overall, and has a bare metal finish. Each is sold separately, but are out of an original box marked "NO. 3112 9/32 IN. BITS FOR YANKEE SCREW DRIVERS NOS. 31A, 131A STANLEY TOOLS NEW BRITAIN CONN.". Each bit is marked "YANKEE 3112" on the shanks. Each one is for the 9/32" larger head screws. Each is new,(never used), no rust or wear. We have many North Brothers and Stanley Yankee tools and parts in stock. Let us know if we can help you find what your need.
Circa: 1970's-80's
Condition: New old stock
Manufacturer: Stanley U.S.A.
|
|
 |
Click for more detail...
T17633
|
Utica Tools 91-10 Adjustable Wrench
This is a nice clean, vintage, used adjustable wrench, marked "ALLOY-UTICE-STEEL 91-10 UTICA TOOLS U.S.A." on the handle. This wrench is 10" long overall. It's has some minimal wear, a few minor edge dings on the jaws, adjusts smoothly, straight, not bent, or rusty. A top quality vintage wrench!
Circa: mid-1900's
Condition: Good+
Manufacturer: UTICA TOOLS U.S.A.
|
|
|
Click for more detail...
TP107
|
S-K 3/8 inch Ratchet Wrench Repair Drive Stem SK
This is a new 3/8" drive, S-K ratchet wrench replacement drive stem ONLY (no pin or washer). Comes with a spring washer, and pin. The hole I.D. is .22" on these.
Circa: late 1900's
Condition: New old stock
Manufacturer: SK - WAYNE
|
|
|
Click for more detail...
T34772
|
Starrett Combination Square 3 Pc. Set
Offering this nice clean 3 pc. combination square with a 12" hardened steel scale marked, "THE L.S.S. CO. ATHOL MASS. USA NO. 4 HARDENED". All the pieces are in good+ condition, with no rust or damage, some light darkening of bare metal on the 12 inch blade, a few small areas of minor pitting noted. The square was used more than the center head, the center head has about 99% black paint intact, basically like new. The square head has about 70% black paint intact, has no scribe, but the level glass is in great shape, was inspected and found square. There is no rust on any of the pieces. Both heads have very good bare metal precision surfaces, both have cross-hatch pattern in the painted part of the castings. A very nice machinist tool! Made in U.S.A. by a well known quality tool maker!
Circa: mid-1900's
Condition: Good+
Manufacturer: THE L.S. STARRETT CO. ATHOL MASS. USA
|
|
|
Click for more detail...
T5630HEX
|
Yankee Screwdriver No. 30A Hex Allen Screwdriver Adapter
Click thumbnails for expanded view.
Stanley Yankee Phillips Screwdriver Magnetic Adapter No. 31A , 131A
Have a North Brothers, or Stanley Yankee Spiral Ratchet Screwdriver? Need a Philips head bit for it? This adapter is for standard 1/4" Hex drive bits, giving you the ability to buy any type head (hex tip) or length head you wish (hex bits are found at any hardware store). We offer both magnetic and non-magnetic type adapters on this website. This adapter is magnetic and magnetizes the hex tip so you can hold the steel screw on the tip without holding it with your fingers. This model also have the spring clip that holds the hex tip snuggly inside the adapter.
This adapter is made in the USA and comes in two shank sizes on the Yankee connecting end, this one is .312 (5/16") diameter for the No. 31A and 131A and some other models as well. I also have one smaller size shank type available at this site. On the hex end there is a coil spring the grasps the hex bit when it is inserted keeping it from falling out. (Don't use bits that are stepped down as they will become stuck in the adapter. Small notches are fine, like the ones shown in the pictures. You also get one hex drive Philips bit with each adapter (the slot head bit is not included). A real nice addition to your bits for a Yankee screwdriver! Made in U.S.A..
Circa: 2015
Condition: New
|
|
|
Click for more detail...
T17866
|
L.S. Starrett No. 370 Shrink Rule 1-8 To Foot
This is a very nice, clean 12" shrink rule with the 1/8" to 1 Foot shrink so it is 12.125" long overall. This one is marked "THE L.S.S. CO. ATHOL MASS. U.S.A. NO. 370 NO. 4 TEMPERED SHRINK 1-8 TO FOOT". The edges are nice and crisp, no rust, minor darkening in a few spot, and some owner's marks (3 round dots). There are owner's initials, and name lightly etched, almost unnoticed. This is a flex type steel rule, .05" thick by 1" wide. A hard to find pattern maker's tool!
Circa: mid-1900's
Manufacturer: Starrett
|
|
|
Click for more detail...
T34835
|
Ridgid Pipe Wrench 18 inch
This is a nice, clean, used, vintage heavy duty 18" size pipe wrench. It is marked "RIDGID HEAVY DUTY 18". On the other side of the handle is marked "THE RIDGID TOOL CO. ELYRIA OHIO U.S.A. 18"". The jaws have minor wear, all threads and moving parts in very good working order. No rust, no damage. Ready to use. Made in Ohio U.S.A.!
Circa: 1970's-90's
Condition: Good++
Manufacturer: Ridgid Elyria Ohio U.S.A.
|
|
|
Click for more detail...
T34830
|
Ridgid No. 42 Pipe Cutter 4-Wheel 1/2-2 inch
This is a very nice, clean, used, vintage heavy duty pipe cutter. It is marked "RIDGID NO. 42 FOUR-WHEEL 1/2-2" and also marked "RIDGID" in several other places including the aluminum alloy handle. The wheels and hardware are all in good working order, snug, not loose very sturdy. The wheels cutting edges show signs of minor wear, two appear to have been polished or sharpened slightly. It is heavy, weighs over 6 pound, but very useful for those larger jobs. Makes cutting pipe simple. Made in Ohio U.S.A.!
Circa: 1970's-90's
Condition: Good++
Manufacturer: Ridgid Elyria Ohio U.S.A.
|
|
|
Click for more detail...
T34852
|
Proto Adjustable Wrench 10 inch
This is a good used 10" long adjustable wrench with good heavy duty jaws. It is marked "10 PROTO 710 LOS ANGELES FORGED ALLOY STEEL" on the handle. There is some minor wear noted some small dings, most of the chrome plating has worn off, but the jaws are in good shape, overall in very good usable condition, with very good jaw alignment, and darkened finish. A nice clean vintage wrench from the 1940's!
Proto Industrial was eventually sold to Stanley Tools, and throughout it's history was committed to top quality hand tools, and continues the same to this day.
Circa: mid 1900's
Condition: Good+
Manufacturer: Proto (Pre-Stanley Tools)
|
|
|
Click for more detail...
T34763
|
Lufkin 5 Pc. Combination Square Set 12 & 18 Inch Rule
Offering this very clean 5 piece combination square clearly marked "THE LUFKIN RULE CO. SAGINAW MICHIGAN MADE IN USA NO. 2504 TEMPERED" on the 12" blade. The set includes the following: 1) 12" No. 2504R tempered rule. Good+ condition very clean with no owner's marks, good markings, a few minor edge dings, no rust, some minor pitting on one side, minimal wear. 2) Square head (Lufkin green paint 90% intact) marked hardened. Good working level intact. no scribe (the scribe hole is there, open if you can find a scribe for it). 3) Center head (Lufkin green paint 95% intact) not marked, no owner's marks, good++ condition! 4) Protractor Head (Lufkin textured black paint 95% intact). Good working level very good condition, very good LUFKIN and graduation markings, no owner's marks. 5) 18" rule marked "THE LUFKIN RULE CO. NO. 4 GRAD. TEMPERED". It has some very minor staining, clean, straight with good markings, and graduations, very crisp, sharp, corners and edges. no owner's marks. We note one grinding wheel cut in the edge in one place on one side between the 3 & 4 inch point, graduations are still visible. Don't miss out on this one, one of the nicest sets I've seen!
Circa: mid 1900's
Condition: Good++
Manufacturer: THE LUFKIN RULE CO. SAGINAW MICHIGAN
|
|
|
Click for more detail...
TP109
|
Ridgid 10 inch Pipe Wrench Knurl Nut
This is a new old stock 10" Ridgid pipe wrench inside threaded, knurled jaw nut for replacement. Please check yours to see if these are the same size, as there might have been some changes made to the nuts in later years. Sizes are shown in the pictures.
|
|
|
Click for more detail...
T17862
|
Lufkin No. 83T Shrink Rule 9/32 To Foot
This is a very nice, clean 12" shrink rule with the 9/32" to 1 Foot shrink so it is 12.156" long overall. This one is marked "THE LUFKIN RULE CO. SAGINAW MICH. MADE IN U.S.A. TEMPERED SHRINK 9/32 TO FOOT". The edges are nice and crisp, no rust, minor darkening in a few spots, very good graduation markings on both sides. There are no owner's initials or names on noted. This is a flex type steel rule, .04" thick by .95" wide. A hard to find pattern maker's tool!
Circa: mid-1900's
Condition: Good+
Manufacturer: The Lufkin Rule Co.
|
|
|
Click for more detail...
TP103
|
S-K 3/4 inch Ratchet Wrench Repair Drive Stem SK
This is a new 3/4" drive, S-K ratchet wrench replacement drive stem. Comes with a spring washer only. The hole I.D. is .38" on these.
Circa: late 1900's
Condition: New old stock
Manufacturer: SK - WAYNE
|
|
|
Click for more detail...
T17640
|
Henry Boker Multi-Cutter Telegraph Pliers 7 inch
This is an nice clean, rare telegraph pliers marked "HENRY BOKER DROP FORGED". These pliers have the 3 different cutting area on them, and cross hatch serrations on the jaws. The pliers show signs of use, minor wear, good hinge joint, jaw serrations are pretty nice, but do have some wear on them, not cracked, no rust, very useable. They are 7" long with 3/8" wide jaws.
Circa: 1900's-1930
Condition: Good+
Manufacturer: H BOKER
|
|
|
Click for more detail...
T34811
|
Diamond Calk Horseshoe Double Ended Adjustable Wrench
This is a nice clean, used, antique double ended adjustable wrench marked "10 IN. DIAMOND CALK HORSESHOE CO. 12 IN. DULUTH MINN DIAMOND TOOL-STEEL DROP-FORGED MADE IN U.S.A." in raised cast lettering on the handle. This wrench is 12.2" long, and has the 10 jaw type on one end, and the 12" jaw type on the opposite end. There is minor wear noted around the jaws, not bad, in very good, usable condition, no rust, with very good jaw alignment, some minor edge dings, some minor pitting on the 12" end mostly. We also note that there are three letters stamped on the 12" end "WHS" Both heads adjust smoothly. We note that 10" end knurl is like new, where the 12" end knurl has some wear, but very good working order. A nice clean vintage wrench from the 1920's-30's era! Diamond Horseshoe Co. and Diamond Calk and Horseshoe Co. are one in the same. The design is so close to that of the Crescent Tool Co., one wonders if the two companies were connected in some way. Yet we find no evidence of this in any records regarding these quality tool making companies. We can't find any history about Diamond Tool or Diamond Calk after early 1950. This is the first one of these that I have seen in this size in several years, quite rare!
Circa: 1920's-1940's
Condition: Good++
Manufacturer: Diamond Calk Horseshoe Co.
|
|
|
